Verified & Latest 300-410 Dump Q&As with Correct Answers [Q254-Q278]

Verified & Latest 300-410 Dump Q&As with Correct Answers

Latest 300-410 dumps - Instant Download PDF

Cisco 300-410 or Implementing Cisco Enterprise Advanced Routing and Services certification exam is designed to test the knowledge of IT professionals in the implementation and management of advanced enterprise routing and service solutions. Implementing Cisco Enterprise Advanced Routing and Services certification exam is part of the Cisco Certified Specialist - Enterprise Advanced Infrastructure Implementation certification path, which is intended for network engineers, administrators, and architects who want to advance their skills in enterprise networking.

To prepare for the Cisco 300-410 exam, candidates can take advantage of a variety of resources, including Cisco's official training courses, study guides, and practice exams. These resources cover all the topics tested on the exam and provide candidates with the knowledge and skills they need to succeed. Additionally, many third-party training providers offer courses and study materials that can help candidates prepare for the exam more effectively. With the right preparation, candidates can pass the Cisco 300-410 exam and demonstrate their expertise in advanced routing and services.

NEW QUESTION # 254
Refer to the exhibit.

Drag and drop the credentials from the left onto the remote login information on the right to resolve a failed login attempt to vtys. Not all credentials are uf SLA by defining frequency and schedulingsed

Answer:

Explanation:

NEW QUESTION # 255
A network engineer is notified that several employees are experiencing network performance related issues, and bandwidth-intensive applications are identified as the root cause. In order to identify which specific type of traffic is causing this slowness, information such as the source/destination IP and Layer 4 port numbers is required. Which feature should the engineer use to gather the required information?

A. Cisco IOS EEM
B. SNMP
C. Syslog
D. NetFlow
E. WCCP

Answer: D

Explanation:
NetFlow Flows Key Fields
A network flow is identified as a unidirectional stream of packets between a given source and destination--both are defined by a network-layer IP address and transport-layer source and des-nation port numbers.
Specifically, a flow is identified as the combination of the following key fields:
Source IP address
Destination IP address
Source Layer 4 port number
Destination Layer 4 port number
Layer 3 protocol type
Type of service (ToS)
Input logical interface

NEW QUESTION # 256
Refer to the exhibit.

A network administrator reviews the branch router console log to troubleshoot the OSPF adjacency issue with the DR router. Which action resolves this issue?

A. Stabilize the DR site flapping link to establish OSPF adjacency.
B. Advertise the branch WAN interface matching subnet for the DR site.
C. Configure the WAN interface for DR site in the related OSPF area.
D. Configure matching hello and dead intervals between sites.

Answer: B

NEW QUESTION # 257
Refer to the exhibits.

A user on the 192.168.1.0/24 network can successfully ping 192.168.3.1, but the administrator cannot ping
192.168.3.1 from the LA router. Which set of configurations fixes the issue?

Answer: A

NEW QUESTION # 258
Refer to the exhibit.

The administrator configured the network devise for end-to-end reachability, but the ASBRs are not propagation routes to each other. Which set of configuration resolves this issue?

Answer: D

NEW QUESTION # 259
Drag and drop the MPLS VPN device types from me left onto the definitions on the right.

Answer:

Explanation:

NEW QUESTION # 260
Refer to the exhibit.

Troubleshoot and ensure that branch B only ever uses the MPLS B network to reach HQ. Which action achieves this requirement?

A. Introduce AS path prepending on the branch A MPLS B network connection so that any HQ advertisements from branch A toward the MPLS B network are prepended three times
B. Modify the weight of all HQ prefixes received at branch B from the MPLS B network to be higher than the weights used on the MPLS A network
C. Introduce an AS path filter on branch A routers so that only local prefixes are advertised into BGP
D. increase the local preference for all HQ prefixes received at branch B from the MPLS B network to be higher than the local preferences used on the MPLS A network

Answer: C

Explanation:
Explanation
If we modify the weight, increase local preference or use AS path prepending then we can only make MPLS B prefer over MPLS A. But when MPLS B is down then MPLS A will be used which does not meet the requirement of this question. Only with AS path filtering we can deny prefixes from certain AS and make sure branch B never uses MPLS A to reach HQ.

NEW QUESTION # 261
Refer to the exhibit.

R1 is configured with IP SLA to check the availability of the server behind R6 but it kept failing. Which configuration resolves the issue?

A. R6(config)# ip sla responder udp-echo ip address 10.10.10.1 port 5000
B. R6(config)# ip access-list extended DDOS
R6(config ext-nac)# 5 permit icmp host 10.66 66.66 host 10.10.10.1
C. R6(config)# ip access-list extended DDOS
R6(confg ext-nac)# 5 permit icmp host 10.10.10.1 host 10.66.66.66
D. R6(config)# ip sla responder

Answer: C

NEW QUESTION # 262
Which configuration adds an IPv4 interface to an OSPFv3 process in OSPFv3 address family configuration?

A. Router(config-router)#ospfv3 1 ipv4 area 0
B. Router ospfv3 1
Address-family ipv4 unicast
C. Router(config-router)#ospfv3 3 1
D. Router ospf3 1 address-family ipv4

Answer: D

NEW QUESTION # 263
Drag and drop the SNMP attributes in Cisco IOS devices from the left onto the correct SNMPv2c or SNMPV3 categories on the right.

Answer:

Explanation:

NEW QUESTION # 264

Refer to the exhibit. Which action restores the routes from neighbors while still filtering 1.1.1.0/24?

A. Modify the route map to permit the access list instead of deny it
B. Modify the access list to deny instead of permit it.
C. Add a second sequence in the route map permit 20
D. Add a second line in the access list to permit any.

Answer: C

NEW QUESTION # 265
Drag and drop the DHCP messages from the left onto the correct uses on the right.

Answer:

Explanation:

NEW QUESTION # 266
Refer to the exhibit.

The security department recently installed a monitoring device between routers R3 and R5, which a loss of network connectivity for users connected to R5. Troubleshooting revealed that the monitoring device cannot forward multicast packets. The team already updated R5 with the correct configuration. Which configuration must be implemented on R3 to resolve the problem by ensuring R3 as the DR for the R3-R5 segment?
A)

B)

C)

D)

A. Option D
B. Option C
C. Option A
D. Option B

Answer: B

NEW QUESTION # 267
Drag and drop the actions from the left into the correct order on the right to configure a policy to avoid following packet forwarding based on the normal routing path.

Answer:

Explanation:

NEW QUESTION # 268
Drag and drop the LDP features from the left onto the descriptions on the right

Answer:

Explanation:

Reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/mp_ldp/configuration/15-sy/mp-ldp-15-sy-boo

NEW QUESTION # 269
Refer to the exhibit.

An administrator is configuring a GRE tunnel to establish an EIGRP neighbor to a remote router. The other tunnel endpoint is already configured. After applying the configuration as shown, the tunnel started flapping. Which action resolves the issue?

A. Advertise the Loopback0 interface from R2 across the tunnel
B. Readdress the IP network on the Tunnel0 on both routers using the /31 netmask
C. Modify the network command to use the Tunnel0 interface netmask
D. Stop sending a route matching the tunnel destination across the tunnel

Answer: D

Explanation:
Explanation
In this question we are advertising the tunnel IP address 192.168.12.2 to the other side. When other end receives the EIGRP advertisement, it realizes it can reach the other side of the tunnel via EIGRP.
In other words, it reaches the tunnel destination through the tunnel itself -> This causes "recursive routing" error.
Note: In order to avoid this error, do not advertise the tunnel destination IP address on the tunnel interface to other side.
Good recursive routing reference: https://networklessons.com/cisco/ccie-routing-switching/gretunnel- recursive-routing-error

NEW QUESTION # 270
Refer to the exhibit.

Redistribution is enabled between the routing protocols, and nowPC2 PC3, and PC4 cannot reach PC1. What are the two solutions to fix the problem? (Choose two.)

A. Filter RIP routes back into RIP when redistributing into RIP in R2
B. Filter all routes except EIGRP routes when redistributing into OSPF in R3.
C. Filter OSPF routes into RIP FROM EIGRP when redistributing into RIP in R2.
D. Filter all routes except RIP routes when redistributing into EIGRP in R2.
E. Filter RIP AND OSPF routes back into OSPF from EIGRP when redistributing into OSPF in R2

Answer: A,B

NEW QUESTION # 271
Refer to the exhibit.

Which interface configuration must be configured on the spoke A router to enable a dynamic DMVPN tunnel with the spoke B router?

A. Option A
B. Option D
C. Option B
D. Option C

Answer: A

NEW QUESTION # 272
Refer to the exhibit.

When monitoring an IPv6 access list, an engineer notices that the ACL does not have any hits and is causing unnecessary traffic to pass through the interface Which command must be configured to resolve the issue?

A. ipv6 traffic-filter INTERNET in
B. ip access-group INTERNET in
C. ipv6 access-class INTERNET in
D. access-class INTERNET in

Answer: C

NEW QUESTION # 273
Which attribute eliminates LFAs that belong to protected paths in situations where links in a network are connected through a common fiber?

A. interface-disjoint
B. shared risk link group-disjoint
C. lowest-repair-path-metric
D. linecard-disjoint

Answer: D

Explanation:
Section: Layer 3 Technologies
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_eigrp/configuration/xe-3s/asr1000/ire-xe-
3s-asr1000/ire-ipfrr.html

NEW QUESTION # 274
Refer to the exhibit. After applying IPsec, the engineer observed that the DMVPN tunnel went down, and both spoke-to-spoke and hub were not establishing.
Which two actions resolve the issue? (Choose two.)

A. Remove the crypto isakmp key cisco address 10.1.1.1 on R2 and R3.
B. Configure the crypto isakmp key cisco address 0.0.0.0 on R2 and R3.
C. Change the mode from mode tunnel to mode transport on R3.
D. Configure the crypto isakmp key cisco address 192.1.1.1 on R2 and R3.
E. Change the mode from mode transport to mode tunnel on R2.

Answer: B,C

Explanation:
Section: VPN Technologies

NEW QUESTION # 275
Refer to the exhibit.

Refer to the exhibit. The services at branch B are down. An engineer notices mal rouler A and router B are not exchanging any routes Which configuration resolves the issue on router B?

Answer: B

NEW QUESTION # 276
Refer to the exhibit.

Refer to the exhibit. The remote server is failing to receive the NetFlow data Which action resolves the issue?

A. Modify the flow record command record v4_r1 to move under flow exporter profile.
B. Modify the interlace command to Ip flow monitor FLOW-MONITOR-1 Input.
C. Modify the udp port under flow exporter profile to Ip transport udp 4739.
D. Modify the flow transport command transport udp 2055 to move under flow monitor profile.

Answer: B

Explanation:
From the exhibit we see there are two flow monitors: the first one "FLOW-MONITOR-1" has been configured correctly but the second one "v4_r1" was left empty andinterface E0/0.1 is using it. So the remote server does not receive any NetFlow data.

NEW QUESTION # 277
An engineer needs dynamic routing between two routers and is unable to establish OSPF adjacency. The output of the show ip ospf neighbor command shows that the neighbor state is EXSTART/EXCHANGE.
Which action should be taken to resolve this issue?