[Jan-2024] Juniper JN0-363 Dumps - Secret To Pass in First Attempt
Juniper JN0-363 Exam Dumps [2024] Practice Valid Exam Dumps Question
NEW QUESTION # 123
Click the Exhibit button. Two bridge domains are configured as shown in the exhibit.
What must be configured as part of the ge-1/0/3 interface configuration to accept tagged frames of VLANs 100 and 200?
- A. interface-mode trunk
- B. encapsulation vlan-bridge
- C. vlan-id-range [100 200]
- D. encapsulation ethernet-bridge
Answer: B
NEW QUESTION # 124
In which situation would you disable penultimate-hop popping?
- A. When you want to utilize a penultimate router that supports IPv6 tunneling
- B. When you want to enforce the same class-of-service behavior through the entire LSP
- C. When you want to bypass a penultimate router that does not support IPv6 tunneling
- D. When you want to ensure the penultimate router can perform the destination route lookup
Answer: B
NEW QUESTION # 125
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The local-address statement is required for the BGP session to establish correctly
- B. The multi-hop statement is required for the BGP session to establish correctly
- C. The configuration is for an internal BGP session
- D. The configuration is for an external BGP session
Answer: A,C
NEW QUESTION # 126
You are adding an IPv6 configuration to an Interface on a Junos device.
In this scenario, which statement is correct?
- A. The link local address must be manually configured within the fdO0::/8 prefix range.
- B. The link local address is automatically created using the MAC address within the fe80::'l0 prefix range.
- C. The link local address is automatically created using the MAC address within the fd00::/8 prefix range.
- D. The link local address must be manually configured within the fe80::/10 prefix range.
Answer: C
NEW QUESTION # 127
Click the Exhibit.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The last node in the path will pop the MPLS label.
- B. The last node in the path will not pop the MPLS label.
- C. The LSP is protected with link protection.
- D. The LSP is protected with fast reroute.
Answer: A,C
NEW QUESTION # 128
What is the Junos default router priority advertisement value for IS-IS?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/concept/routing-protocol-is-is-security-designated-router-understanding.html#:~:text=If%20routers%20in
%20the%20network,a%20priority%20value%20of%2064.
NEW QUESTION # 129
Click the Exhibit button.
Both configuration hierarchies shown in the exhibit have been committed to your MX Series device.
Which two statements are true in this scenario? (Choose two.)
- A. The active 10.3.0.0/24 prefix installed in the route table will have a route preference of 5
- B. Traffic destined to 10.3.0.1 will use the R1-to-R6 LSP as a next hop
- C. Traffic destined to 10.3.0.1 will not use the R1-to-R6 LSP as a next hop
- D. The active 10.3.0.0/24 prefix installed in the route table will have a route preference of 7
Answer: B,D
NEW QUESTION # 130
Which two statements are true about VRRP? (Choose two.)
- A. VRRP does not require redundant REs on each member.
- B. Interfaces within the same VRRP group must be on the same subnet for each member.
- C. Interfaces within the same VRRP group do not have to be on the same subnet for each member.
- D. VRRP requires redundant REs on each member.
Answer: A,B
NEW QUESTION # 131
Click the Exhibit.
Referring to the exhibit, which IS-IS router will be selected as the DIS?
- A. Router 2
- B. Router 1
- C. Router 3
- D. Router 4
Answer: D
NEW QUESTION # 132
Click the Exhibit.
Referring to the exhibit, which statement is correct about MVRP?
- A. AS1's VLAN ID list is missing an entry for VLAN 300.
- B. ES2 is not interested in VLAN 300.
- C. AS1 is not allowing ES2 access to VLAN 300.
- D. ES1 is not advertising VLAN 300 to AS1.
Answer: B
NEW QUESTION # 133
Which two routing protocols make use of a designated router, or pseudo node, to represent a broadcast network? (Choose two.)
- A. OSPF
- B. MPLS
- C. IS-IS
- D. BGP
Answer: A,C
NEW QUESTION # 134
Which two statements are correct about default BGP route propagation? (Choose two.)
- A. IBGP speakers advertise IBGP-learned routes to other IBGP peers.
- B. EBGP speakers advertise IBGP-learned routes to other EBGP peers by using apolicy.
- C. EBGP speakers advertise IBGP-learned routes to other EBGP peers.
- D. IBGP speakers advertise EBGP-learned routes to other IBGP peers.
Answer: B,D
NEW QUESTION # 135
You want the R1 and R3 routers to forward traffic destined to the 203.0.113.0/24 network through R2. Which BGP attribute would you modify to satisfy this requirement?
- A. MED
- B. community
- C. origin
- D. local preference
Answer: A
NEW QUESTION # 136
Click the Exhibit button.
Referring to the exhibit, which statement is correct?
- A. Interface xe-0/0/0.0 can only form a single adjacency
- B. Interface ge-1/0/0.0 can only form a single adjacency
- C. Interface xe-0/0/0.0 has a default metric of 10
- D. Interface ge-3/0/0.0 has a default metric of 10
Answer: B
NEW QUESTION # 137
You are asked to change the default TTL handling behavior on your Junos device to ensure that the RSVP-signaled LSPs in your MPLS network cannot be mapped.
Which configuration should be performed to accomplish this task?
- A. Configure the no-propagate-ttl parameter for each LSP on the ingress device
- B. Configure the no-decrement-ttl parameter for each LSP on the egress device
- C. Configure the no-decrement-ttl parameter for each LSP on the ingress device
- D. Configure the no-propagate-ttl parameter for each LSP on the egress device
Answer: D
NEW QUESTION # 138
You must establish an MPLS LSP between two locations. You are required to ensure that the LSP traverses specific routers within the network.
Which solution is correct in this scenario?
- A. Enable traffic engineering within RSVP and enable the Fast Reroute feature
- B. Implement LDP and define the explicit route the LSP must follow
- C. Implement RSVP and define the explicit route the LSP must follow
- D. Enable traffic engineering within LDP and define the explicit route the LSP must follow
Answer: C
NEW QUESTION # 139
Click the Exhibit button.
Referring to the exhibit, which statement is correct?
- A. Routes from 10.2.2.2 are less preferred than routes from 10.1.1.1
- B. Routes from 10.3.3.3 are less preferred than the default local preference
- C. Routes from 10.1.1.1 are less preferred than routes from 10.2.2.2
- D. Routes from 10.1.1.1 are less preferred than the default local preference
Answer: A
NEW QUESTION # 140
Which two statements ate correct about the BGP next-hop attribute value? (Choose two.)
- A. By default, the next-hop value is not changed across IBGP links.
- B. By default, the next-hop value is changed across EBGP links.
- C. By default, the next-hop value is changed across IBGP links.
- D. By default, the next-hop value is not changed across EBGP links.
Answer: C
NEW QUESTION # 141
Which three statements are true regarding the show system switchover operational mode command? (Choose three.)
- A. This command can only be issued on the master Routing Engine.
- B. This command can only be issued on the backup Routing Engine.
- C. This command displays the status of the interface and process databases.
- D. This command displays the status of the kernel database.
- E. This command displays the status of graceful switchover.
Answer: B,D,E
NEW QUESTION # 142
Exhibit
You have configured graceful RE switchover (GRES), however you cannot complete the show system switchover command.
Referring to the exhibit, what is the problem?
- A. The command is only available If a backup router is configured.
- B. The command is only available if non-stop routing is enabled.
- C. The command is only available on the backup Routing Engine.
- D. The command is only available If graceful restart is enabled.
Answer: C
NEW QUESTION # 143
Which two statements ate correct about the community BGP attribute on a Junos device? (Choose two.)
- A. If the community attribute is present, it should be passed unchanged in the BGP updates.
- B. If the community attribute is present, it is ignored and deleted in the BGP updates.
- C. The community attribute is a mandatory BGP attribute.
- D. The community attribute is an optional BGP attribute.
Answer: A,C
NEW QUESTION # 144
......
JN0-363 Exam Dumps PDF Guaranteed Success with Accurate & Updated Questions: https://www.exam4labs.com/JN0-363-practice-torrent.html
JN0-363 Dumps - Grab Out For [NEW-2024] Juniper Exam: https://drive.google.com/open?id=1vjD3yRCGlkq7h0c-ESpoQgn8h23-VhK-