[Jan-2022] 300-510 Exam Dumps, 300-510 Practice Test Questions
Attested 300-510 Dumps PDF Resource [2022]
Cisco 300-510 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
| Topic 11 |
|
| Topic 12 |
|
| Topic 13 |
|
| Topic 14 |
|
| Topic 15 |
|
Prerequisites for Final Exam
The individuals concerned will already have awareness and skills involving how to execute and operate Cisco core technologies for the networks that are targeted at the Service Providers. They should also have a deep comprehension of the 300-510 subject matter so gaining the requisite knowledge takes deliberate learning that makes use of recommended courses as well as revision or study guides. Potential candidates should also be aware of the registration process for the official test. Thus, they should have a Pearson VUE account before they can do the final registration, which includes selecting the number of the evaluation they intend to do.
NEW QUESTION 61
Refer to the exhibit.
How are packets directed through the data plane when SRv6 is implemented?
- A. A stack of labels represents an ordered list of segments
- B. An ordered list of segments is encoded in a routing extension header
- C. The packet is encapsulated with a header and trailer encoding the ordered list of segments
- D. The MPLS data plane is used to push labels onto IGP routes
Answer: B
NEW QUESTION 62
Refer to the exhibit.
An engineer is addressing an IS-IS design issue which is running within the topology. All links are running on FastEthernet, except the link between R5 and R4, which is Gigabit Ethernet. Which statement about the design is true?
- A. R4 prefer to reach R5 using R1 as the next hop
- B. All links have equal cost if the default metric is used
- C. R1 prefer to use R5 as the next hop to reach R4
- D. R5 prefers to use R4 as the next hop for all routes
Answer: B
NEW QUESTION 63
An engineer is troubleshooting end-to-end customer traffic across an MPLS VPN service provider network. Which tasks should the engineer use to solve the routing issues? Drag and drop the table types from the left onto the most useful troubleshooting tasks/router types on the right. (Not all options are used.)
Answer:
Explanation:
NEW QUESTION 64
Refer to the exhibit.
Router 1 has attempted to establish a Cisco MPLS TE tunnel to router 2, but the tunnel has failed. Which statement about this configuration is true?
- A. Router 1 and router 2 must define the RSVP bandwidth reserved on the physical interfaces
- B. Router 1 must define an explicit path to router 2
- C. Router 1 must have Cisco MPLS TE enabled on interface gigabitethernet0/1
- D. Router 2 must have a tunnel interface created with router 1 as the destination
Answer: C
NEW QUESTION 65 
Refer to the exhibit. A network operator wants to expand the segment routing global block in upcoming maintenance. The operator must ensure that the changes to the segment routing global block have no adverse impacts on the prefix-sid associated with the loopback0 interface used within the OSPF domain. Which command can the operator use to enforce R2 to have a strict prefix-sid assignment to loopback0?
- A.
- B.
- C.
- D.
Answer: C
NEW QUESTION 66
Which two statements about mapping multicast IP addresses to MAC addresses are true? (Choose two.)
- A. All destination MAC addresses begin with an octet of binary 1s
- B. The router performs the mapping before it hands the packet off to a switch
- C. The mapping process may generate overlapping addresses, which can cause receivers to receive unwanted packets
- D. All multicast MAC addresses end with 0x0100.5E
- E. All mapped multicast MAC addresses begin with 0x0100.5E
Answer: C,E
NEW QUESTION 67
Refer to the exhibit.
Router 1 is connected to router 2 on interface TenGigE0/1. Which interface provides the alternate path to 172.16.200.9/32 when the link between router 1 and router 2 goes down?
- A. TenGigE0/2 interface provides the alternate path
- B. A primary path must be manually installed
- C. TenGigE0/1 interface provides the alternate path
- D. A backup path must be statically installed
Answer: A
NEW QUESTION 68
Refer to the exhibit.
An administrator is troubleshooting Internet access issues on a customer's network. After applying this ISIS configuration to R1, the administrator notices that it fails to redistribute the default route into IS-IS. After checking the connectivity between the ISIS router and the ISP router the engineer confirmed there is Layer 3 connectivity between them Which action should be taken to correct the problem?
- A. Associate the default route with a VRF
- B. Configure R1 as a Layer 1 router
- C. Configure the default route under any routing protocol other than IS-IS
- D. Add the default-information originate command to the configuration
Answer: D
NEW QUESTION 69
An engineer is troubleshooting end-to-end customer traffic across an MPLS VPN service provider network.
Which tasks should the engineer use to solve the routing issues? Drag and drop the table types from the left onto the most useful troubleshooting tasks/router types on the right. (Not all options are used.)
Answer:
Explanation:
NEW QUESTION 70
Refer to the exhibit.
After you applied these configurations to routers R1 and R2, the two devices could not form a neighbor relationship. Which reason for the problem is the most likely?
- A. The two routers have different IS-types.
- B. The two routers have the same area ID.
- C. The two routers have the same network ID.
- D. The two routers cannot authenticate with one another.
Answer: D
NEW QUESTION 71
Refer to the exhibit.
Which attribute can router 1 alter so that only other iBGP peers prefer to use 192.168.4.2 as the next hop for route 192.168.3.0/24?
- A. weight
- B. MED
- C. local preference
- D. origin
Answer: B
NEW QUESTION 72
An engineer is troubleshooting end-to-end customer traffic across an MPLS VPN service provider network.
Which tasks should the engineer use to solve the routing issues? Drag and drop the table types from the left onto the most useful troubleshooting tasks/router types on the right. (Not all options are used.)
Answer:
Explanation:
NEW QUESTION 73
Refer to the exhibit.
After troubleshooting an OSPF adjacency issue, routers 1, 2, and 3 have formed OSPF neighbor relationships. Which statement about the configuration is true?
- A. Router 2 uses router 3 as the next hop for 192.168.0.0/24
- B. Router 2 uses router 1 as the next hop for 192.168.0.0/24
- C. Router 2 receives a Type 5 LSAs from router 1 for its connected subnets
- D. Router 2 receives a Type 7 LSAs from router 3 for its connected subnets
Answer: C
NEW QUESTION 74
Refer to the exhibit.
After you applied these configurations to routers R1 and R2, the two devices could not form a neighbor relationship. Which reason for the problem is the most likely?
- A. The two routers have different IS-types.
- B. The two routers have the same area ID.
- C. The two routers have the same network ID.
- D. The two routers cannot authenticate with one another.
Answer: D
NEW QUESTION 75
Refer to the exhibit.
An engineer working for a private telecommunication company with an employee id 3977 74 814 implemented the configuration on Router 1. what is the effect of it?
- A. Router 1 sends only one best path to neighbor 192 168.1.1.
- B. Router 1 sends up to three paths to neighbor 192.168.1.1 for all routes
- C. Router 1 sends and receives multiple best paths from neighbor 192.168.1.1
- D. Router 1 receives only one best path from neighbor 192.168.1.1
Answer: C
NEW QUESTION 76
Refer to the exhibit.
After troubleshooting an OSPF adjacency issue, routers 1, 2, and 3 have formed OSPF neighbor relationships. Which statement about the configuration is true?
- A. Router 2 uses router 3 as the next hop for 192.168.0.0/24
- B. Router 2 uses router 1 as the next hop for 192.168.0.0/24
- C. Router 2 receives a Type 5 LSAs from router 1 for its connected subnets
- D. Router 2 receives a Type 7 LSAs from router 3 for its connected subnets
Answer: C
NEW QUESTION 77
For which reason can two devices fail to establish an OSPF neighbor relationship?
- A. The two devices have different process IDs
- B. The two devices have different router IDs
- C. The two devices have different network types
- D. The two devices have the same area ID
Answer: C
NEW QUESTION 78
Refer to the exhibit.
A network operator is working to deploy a Unified BGP design and allow it to be available only in selected markets and services in the future. The label allocation is not functioning as desired. Which action will fix the issue?
- A. Reconfigure the route-policy ALL_LABELS to pass.
- B. Remove the route policy and only configure "allocate-label".
- C. Remove the allocate-labels command.
- D. Reconfigure the route-policy ALL_LABELS to match all after the drop.
Answer: A
NEW QUESTION 79
Refer to the exhibit.
A network operator is working to filter routes from being advertised that are covered under an aggregate announcement. The receiving router of the aggregate announcement block is still getting some of the more specific routes plus the aggregate. Which configuration change ensures that only the aggregate is announced now and in the future if other networks are to be added?
- A. Set each specific route in the AGGRO policy to remove instead of suppress-route
- B. Set each specific route in the AGGRO policy to drop instead of suppress-route
- C. Configure the summary-only keyword on the aggregate command
- D. Filter the routes on the receiving router
Answer: C
NEW QUESTION 80
......
Latest 300-510 Actual Free Exam Questions Updated 104 Questions: https://www.exam4labs.com/300-510-practice-torrent.html
Free 300-510 Exam Braindumps certification guide Q&A: https://drive.google.com/open?id=1KOBxZnNtBnfqRgcwZagqUfh4uL54I1Zf