CCNP Service Provider 300-510 Dumps | Updated Dec 24, 2021 - Exam4Labs
Master 2021 Latest The Questions CCNP Service Provider and Pass 300-510 Real Exam!
NEW QUESTION 58
Refer to the exhibit.
A network operator must stop 10.33.33.33/32 from being redistributed into Level 1 router XR1. Which configuration meets this need?
- A. Option C
- B. Option B
- C. Option D
- D. Option A
Answer: A
NEW QUESTION 59 
Refer to the exhibit. Routers R1 and R2 cannot form a neighbor relationship, but the network is otherwise configured correctly and operating normally. Which two statements describe the problem? (Choose two.)
- A. The two routers are in different subnets
- B. The two routers are in the same area
- C. The two routers are in different areas
- D. The two routers have the same network ID
- E. The two routers have password mismatch issues
Answer: A,C
NEW QUESTION 60
Refer to the exhibit.
An engineer has successfully fixed BGP peering issue. R1 has an established eBGP peering with R2 and R3. Which mechanism should the engineer apply in order to steer the traffic correctly?
- A. The weight attribute can be applied on R2 to influence AS 65513 to use AS 65515 as the primary path.
- B. The IGP metric can be manipulated on R1 to allow traffic to be load balanced between R2 and R3.
- C. The MED attribute can be applied on R2 to influence R1 to use it as the primary path.
- D. The local preference attribute can be applied on R3 to influence AS 65513 to use AS 65515 as the secondary path.
Answer: B
NEW QUESTION 61
Refer to the exhibit.
An engineer is troubleshooting an OSPF issue. Router 1 has a neighbor relationship with router 2. Only router 1 classful EIGRP routes can be seen on router 2. In order for all EIGRP routes to be redistributed correctly, which action should be taken?
- A. Router 1 must have the keyword included in the redistribution command for all EIGRP routes to be redistributed.
- B. Router 1 must have the keyword metric-type 1 included in the redistribution command for all EIGRP routes to be redistributed.
- C. Router 1 must have the keyword ospf-metric included in the redistribution command for all EIGRP routes to be redistributed.
- D. Router 1 must remove the AS number 1 from the redistribution command for all EIGRP routes to be redistributed.
Answer: A
NEW QUESTION 62
An engineer is working to implement segment routing protocol on the customer's core network. Which step should the engineer take before the segment routing is enabled and is running with BGP?
- A. Explicit-null must be configured for all neighbors.
- B. Segment routing must be configured with ISIS.
- C. MPLS must be configured.
- D. Segment routing must be configured with EIGRP.
Answer: C
NEW QUESTION 63 
Refer to the exhibit. Which attribute can router 1 alter so that only other iBGP peers prefer to use 192.168.4.2 as the next hop for route 192.168.3.0/24?
- A. MED
- B. origin
- C. local preference
- D. weight
Answer: A
NEW QUESTION 64
Refer to the exhibit.
Which attribute can router 1 alter so that only other iBGP peers prefer to use 192.168.4.2 as the next hop for route 192.168.3.0/24?
- A. MED
- B. origin
- C. local preference
- D. weight
Answer: A
NEW QUESTION 65
Refer to the exhibit.
XR1 and XR2 are sending the prefix 10.11.11.0/24 to XR3. A configured policy on XR1 is incorrectly prepending AS path 11 11 12 12 onto this prefix. A network operator wants to add a policy onto XR3 that will not allow the falsely prepending prefix from being installed. Which policy configuration applied to the XR3 neighbor configuration for XR1 can accomplish this requirement without impact to other or future received routes?
- A. Option B
- B. Option C
- C. Option A
- D. Option D
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/routers/crs/software/crs_r4-1/routing/command/reference/ b_routing_cr41crs/b_routing_cr41crs_chapter_01000.html#wp3850885229
NEW QUESTION 66
Which cost is the default when redistributing routes from BGP to OSPF?
- A. 0
- B. automatic
- C. infinite
- D. 1
Answer: A
NEW QUESTION 67 
Refer to the exhibit. An engineer is troubleshooting an OSPF issue. Router 1 has a neighbor relationship with router 2. Only router 1 classful EIGRP routes can be seen on router 2. In order for all EIGRP routes to be redistributed correctly, which action should be taken?
- A. Router 1 must have the keyword metric-type 1 included in the redistribution command for all EIGRP routes to be redistributed.
- B. Router 1 must have the keyword ospf-metric included in the redistribution command for all EIGRP routes to be redistributed.
- C. Router 1 must have the keyword subnets included in the redistribution command for all EIGRP routes to be redistributed.
- D. Router 1 must remove the AS number 1 from the redistribution command for all EIGRP routes to be redistributed.
Answer: C
NEW QUESTION 68
Refer to the exhibit.
Router 1 is connected to router 2 on interface TenGigE0/1. Which interface provides the alternate path to 172.16.200.9/32 when the link between router 1 and router 2 goes down?
- A. TenGigE0/1 interface provides the alternate path
- B. TenGigE0/2 interface provides the alternate path
- C. A primary path must be manually installed
- D. A backup path must be statically installed
Answer: B
NEW QUESTION 69
Refer to the exhibit.
A service provider technician is working on a multicast issue for a customer. While checking the multicast table, the technician notices that no flags are present for the (1.1.1.1, 239.1.1.1) entry, yet flags are present for the (1.1.1.1, 232.1.1.1) entry.
Which factor might explain this issue?
- A. Only the default SSM range is permitted
- B. Only the administratively scoped range is permitted
- C. Only ASM is permitted
- D. Only GLOP is permitted
Answer: A
NEW QUESTION 70
Refer to the exhibit.
Router 1 and Routed have shared routes in the OSPF database but the routes are missing from their routing tables. Checking me prefix-list configuration on both routers, the engineer confirmed all networks are allowed What action should the engineer take to fa the problem?
- A. Switch the DR and BDR roles between the two routers
- B. Configure the two routers with different process IDs
- C. Configure interface Senal1/0 on Router1 as a point-to-point interface
- D. Configure the two routers with different hello and dead timer values
Answer: C
NEW QUESTION 71
Refer to the exhibit.
CE1 is the gateway router into the provider network via PE1. A network operator must inject a default route into OSPF area 0. All devices inside area 0 must be able to reach PE1. Which configuration achieves this goal?
- A. Option C
- B. Option B
- C. Option D
- D. Option A
Answer: A
NEW QUESTION 72
Drag and drop the attributes for the BGP route selection on the left into the correct order on the right. Not all options are used.
Answer:
Explanation:
NEW QUESTION 73
A network engineer is troubleshooting OSPF multiare
a. Which Cisco IOS XR feature should the engineer use in order to streamline OSPF issue?
- A. routing process enabled by default on all interfaces
- B. show lp ospf topology command
- C. DR support for topology management
- D. hierarchical CLI
Answer: B
NEW QUESTION 74
......
A fully updated 2021 300-510 Exam Dumps exam guide from training expert Exam4Labs: https://www.exam4labs.com/300-510-practice-torrent.html
Practice To 300-510 - Exam4Labs Remarkable Practice On your Implementing Cisco Service Provider Advanced Routing Solutions Exam: https://drive.google.com/open?id=1KOBxZnNtBnfqRgcwZagqUfh4uL54I1Zf