Updated Feb 22, 2023 EX200 Exam Dumps - PDF Questions and Testing Engine
New (2023) RedHat EX200 Exam Dumps
NEW QUESTION 16
Configure your NFS services. Share the directory by the NFS Shared services.
Answer:
Explanation:
/etc/init.d/rpcbind start
/etc/init.d/nfslock start
/etc/init.d/nfs start
chkconfig rpcbind on
chkconfig nfslock on
chkconfig nfs on
showmount -e localhost
NEW QUESTION 17
SIMULATION
Configure your Host Name, IP Address, Gateway and DNS.
Host name: dtop5.dn.ws.com
IP Address: 172.28.10.5/4
Gateway: 172.28.10.1
DNS: 172.28.10.1
Answer:
Explanation:
See explanation below.
Explanation/Reference:
Explanation:
1. Configure Host Name
vim /etc/sysconfig/network NETWORKING=yes HOSTNAME=dtop5.dn.ws.com GATEWAY=172.28.10.1
2. Configure IP Address, Gateway and DNS
Configure the network by Network Manager:
Note: Please remember to choose two options:
Connect automatically
Available to all users
Click "Apply", save and exit, and restart your network services:
# Service network restart
3. Validate these profiles:
a) Check gateway: # vim / etc / sysconfig / network
NETWORKING=yes
HOSTNAME=dtop5.dn.ws.com
GATEWAY=172.28.10.1
b) Check Host Name: # vim /etc/hosts
c) Check DNS: # vim /etc/resolv.conf
# Generated by NetworkManager
Search dn.ws.com
Nameserver 172.28.10.1
d) Check Gateway: # vim /etc/sysconfig/network-scripts/ifcfg-eth0
NEW QUESTION 18
Copy /etc/fstab to /var/tmp name admin, the user1 could read, write and modify it, while user2 without any permission.
Answer:
Explanation:
see explanation below.
Explanation
# cp /etc/fstab /var/tmp/
# chgrp admin /var/tmp/fstab
# setfacl -m u:user1:rwx /var/tmp/fstab
# setfacl -m u:user2:--- /var/tmp/fstab
# ls -l
-rw-rw-r--+ 1 root admin 685 Nov 10 15:29 /var/tmp/fstab
NEW QUESTION 19
One Domain RHCE is configured in your lab, your domain server is server1.example.com. nisuser2001, nisuser2002, nisuser2003 user are created on your server 192.168.0.254:/rhome/stationx/nisuser2001. Make sure that when NIS user login in your system automatically mount the home directory. Home directory is separately shared on server /rhome/stationx/ where x is your Station number.
Answer:
Explanation:
see explanation below.
Explanation
* use the authconfig --nisserver=<NIS SERVER> --nisdomain=<NIS DOMAIN> -- update Example: authconfig --niserver=192.168.0.254 --nisdomain=RHCE --update or system-config-authentication
* Click on Enable NIS
* Type the NIS Domain: RHCE
* Type Server 192.168.0.254 then click on next and ok
* You will get a ok message.
* Create a Directory /rhome/stationx where x is your station number.
* vi /etc/auto.master and write at the end of file /rhome/stationx /etc/auto.home --timeout=60
* vi /etc/auto.home and write
* -rw,soft,intr 192.168.0.254:/rhome/stationx/&
Note: please specify your station number in the place of x.
* Service autofs restart
* Login as the nisuser2001 or nisuser2002 on another terminal will be Success. According to question, RHCE domain is already configured. We have to make a client of RHCE domain and automatically mount the home directory on your system. To make a member of domain, we use the authconfig with option or system-config authentication command. There a are lots of authentication server i.e NIS, LDAB, SMB etc. NIS is a RPC related Services, no need to configure the DNS, we should specify the NIS server address.
Here Automount feature is available. When user tried to login, home directory will automatically mount. The automount service used the /etc/auto.master file. On
/etc/auto.master file we specified the mount point the configuration file for mount point.
NEW QUESTION 20
SIMULATION
One Logical Volume is created named as myvol under vo volume group and is mounted. The Initial Size of that Logical Volume is 400MB. Make successfully that the size of Logical Volume 200MB without losing any data. The size of logical volume 200MB to 210MB will be acceptable.
Answer:
Explanation:
See explanation below.
Explanation/Reference:
Explanation:
First check the size of Logical Volume: lvdisplay /dev/vo/myvol
Make sure that the filesystem is in a consistent state before reducing:
# fsck -f /dev/vo/myvol
Now reduce the filesystem by 200MB.
# resize2fs /dev/vo/myvol 200M
It is now possible to reduce the logical volume. #lvreduce /dev/vo/myvol -L 200M Verify the Size of Logical Volume: lvdisplay /dev/vo/myvol Verify that the size comes in online or not: df -h
NEW QUESTION 21
Add user: user1, set uid=601
Password: redhat
The user's login shell should be non-interactive.
Answer:
Explanation:
Answer see in the explanation.
Explanation/Reference:
# useradd -u 601 -s /sbin/nologin user1
# passwd user1
redhat
NEW QUESTION 22
Make a swap partition having 100MB. Make Automatically Usable at System Boot Time.
Answer:
Explanation:
see explanation below.
* Use fdisk /dev/hda ->To create new partition.
* Type n-> For New partition
* It will ask for Logical or Primary Partitions. Press l for logical.
* It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
* Type the Size: +100M ->You can Specify either Last cylinder of Size here.
* Press P to verify the partitions lists and remember the partitions name. Default System ID is 83 that means Linux Native.
* Type t to change the System ID of partition.
* Type Partition Number
* Type 82 that means Linux Swap.
* Press w to write on partitions table.
* Either Reboot or use partprobe command.
* mkswap /dev/hda? ->To create Swap File system on partition.
* swapon /dev/hda? ->To enable the Swap space from partition.
* free -m ->Verify Either Swap is enabled or not.
* vi /etc/fstab/dev/hda? swap swap defaults 0 0
* Reboot the System and verify that swap is automatically enabled or not.
NEW QUESTION 23
Your System is going use as a router for 172.24.0.0/16 and 172.25.0.0/16. Enable the IP Forwarding.
1. echo "1" >/proc/sys/net/ipv4/ip_forward
2. vi /etc/sysctl.conf net.ipv4.ip_forward=1
Answer:
Explanation:
see explanation below.
Explanation
/proc is the virtual filesystem, containing the information about the running kernel.
To change the parameter of running kernel you should modify on /proc. From Next reboot the system, kernel will take the value from /etc/sysctl.conf.
NEW QUESTION 24
CORRECT TEXT
Install a FTP server, and request to anonymous download from /var/ftp/pub catalog. (it needs you to configure yum direct to the already existing file server. )
Answer:
Explanation:
# cd /etc/yum.repos.d
# vim local.repo
[local]
name=local.repo
baseurl=file:///mnt
enabled=1
gpgcheck=0
# yum makecache
# yum install -y vsftpd
# service vsftpd restart
# chkconfig vsftpd on
# chkconfig --list vsftpd
# vim /etc/vsftpd/vsftpd.conf
anonymous_enable=YES
NEW QUESTION 25
Add a new logical partition having size 100MB and create the data which will be the mount point for the new partition.
Answer:
Explanation:
see explanation below.
Explanation
1. Use fdisk /dev/hda-> To create new partition.
2. Type n ->For New partitions
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Keys
5. Type the size: +100M you can specify either Last cylinder of size here.
6. Press P to verify the partitions lists and remember the partitions name.
7. Press w to write on partitions table.
8. Either Reboot or use partprobe command.
9. Use mkfs -t ext3 /dev/hda?
OR
1. mke2fs -j /dev/hda? ->To create ext3 filesystem.
2. vi /etc/fstab
3. Write:
/dev/hda? /data ext3 defaults 0 0
4. Verify by mounting on current sessions also:
mount /dev/hda? /data
NEW QUESTION 26
SIMULATION
A YUM source has been provided in the
http://instructor.example.com/pub/rhel6/dvd
Configure your system and can be used normally.
Answer:
Explanation:
See explanation below.
Explanation/Reference:
Explanation:
/etc/yum.repos.d/base.repo
[base]
name=base
baseurl=http://instructor.example.com/pub/rhel6/dvd
gpgcheck=0
yum list
NEW QUESTION 27
Configure autofs to automount the home directories of LDAP users as follows:
host.domain11.example.com NFS-exports /home to your system.
This filesystem contains a pre-configured home directory for the user ldapuser11 ldapuser11's home directory is host.domain11.example.com /rhome/ldapuser11 ldapuser11's home directory should be automounted locally beneath /rhome as /rhome/ldapuser11 Home directories must be writable by their users ldapuser11's password is 'password'.
Answer:
Explanation:
see explanation below.
Explanation
* vim /etc/auto.master /rhome /etc/auto.misc
wq!
# vim /etc/auto.misc
ldapuser11 --rw,sync host.domain11.example.com:/rhome/ldpauser11 :wq!
#service autofs restart
* service autofs reload
* chkconfig autofs on
* su -ldapuser11
Login ldapuser with home directory
# exit
NEW QUESTION 28
Part 1 (on Node1 Server)
Task 3 [Managing Local Users and Groups]
Create the following users, groups and group memberships:
A group named sharegrp
A user harry who belongs to sharegrp as a secondary group
A user natasha who also belongs to sharegrp as a secondary group
A user copper who does not have access to an interactive shell on the system and who is not a member of sharegrp.
harry, natasha and copper should have the password redhat
Answer:
Explanation:
* [root@node1 ~]# groupadd sharegrp
[root@node1 ~]# useradd harry
[root@node1 ~]# useradd natasha
[root@node1 ~]# usermod -aG sharegrp harry
[root@node1 ~]# usermod -aG sharegrp natasha
[root@node1 ~]# useradd -s /sbin/nologin copper
[root@node1 ~]# echo "redhat" | passwd --stdin harry
[root@node1 ~]# echo "redhat" | passwd --stdin natasha
[root@node1 ~]# echo "redhat" | passwd --stdin copper
### For Checking ###
[root@node1 ~]# su - copper
This account is currently not available.
[root@node1 ~]# su - natasha
[root@node1 ~]# id
[root@node1 ~]# su - harry
[root@node1 ~]# id
NEW QUESTION 29
CORRECT TEXT
Add users: user2, user3.
The Additional group of the two users: user2, user3 is the admin group Password: redhat
Answer:
Explanation:
# useradd -G admin user2
# useradd -G admin user3
# passwd user2
redhat
# passwd user3
redhat
NEW QUESTION 30
SIMULATION
Create a volume group, and set the size is 500M, the size of single PE is 16M. Create logical volume named lv0 in this volume group, set size is 20 PE, make it as ext3 file system, and mounted automatically under data.
Answer:
Explanation:
See explanation below.
Explanation/Reference:
Explanation: fdisk /dev/vda
pvcreate /dev/vda3
vgcreate -s 16M vg0 /dev/vda3
lvcreate -n lv0 -l 20 vg0
mkfs.ext3 /dev/mapper/vg0-lv0
mkdir /data
/etc/fstab:
/dev/mapper/vg0-lv0 /data ext3 defaults 0 0
mount -a
mount | grep data
NEW QUESTION 31
We are working on /data initially the size is 2GB. The /dev/test0/lvtestvolume is mount on /dat a. Now you required more space on /data but you already added all disks belong to physical volume. You saw that you have unallocated space around 5 GB on your harddisk. Increase the size of lvtestvolume by 5GB.
Answer:
Explanation:
Create a partition having size 5 GB and change the syste id '8e'.
use partprobe command
pvcreate /dev/hda9 Suppose your partition number is hda9.
vgextend test0 /dev/hda9 vgextend command add the physical disk on volume group.
lvextend -L+5120M /dev/test0/lvtestvolume
verify using lvdisplay /dev/test0/lvtestvolume.
NEW QUESTION 32
Open kmcrl value of 5 , and can verify in /proc/ cmdline
Answer:
Explanation:
# vim /boot/grub/grub.conf
kernel/vmlinuz-2.6.32-71.el6.x86_64 ro root=/dev/mapper/GLSvg-GLSrootrd_LVM_LV=GLSvg/GLSroot rd_LVM_LV=GLSvg/GLSswaprd_NO_LUKSrd_NO_MDrd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us crashkernel=auto rhgb quiet kmcrl=5 Restart to take effect and verification:
# cat /proc/cmdline
ro root=/dev/mapper/GLSvg-GLSroot rd_LVM_LV=GLSvg/GLSroot rd_LVM_LV=GLSvg/GLSswap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet kmcrl=5
NEW QUESTION 33
Resize the logical volume vo and its filesystem to 290 MB. Make sure that the filesystem contents remain intact.
Note: Partitions are seldom exactly the same size requested, so a size within the range of 260 MB to 320 MiB is acceptable.
Answer:
Explanation:
see explanation below.
Explanation
df -hT
lvextend -L +100M /dev/vg0/vo
lvscan
xfs_growfs /home/ // home is LVM mounted directory
Note: This step is only need to do in our practice environment, you do not need to do in the real exam resize2fs /dev/vg0/vo // Use this comand to update in the real exam df -hT OR e2fsck -f/dev/vg0/vo umount /home resize2fs /dev/vg0/vo required partition capacity such as 100M lvreduce -l 100M /dev/vg0/vo mount
/dev/vg0/vo /home
df -Ht
NEW QUESTION 34
SELinux must be running in the Enforcing mode.
Answer:
Explanation:
see explanation below.
Explanation
getenforce // Check the current mode of SELinux // SELinux runs in enforcing mode // Check getenforce 1 getenforce vim /etc/selinux/config selinux=enforcing // To temporarily enable SELinux wg sestatus
NEW QUESTION 35
Your System is going to use as a Router for two networks. One Network is 192.168.0.0/24 and Another Network is 192.168.1.0/24. Both network's IP address has assigned. How will you forward the packets from one network to another network?
Answer:
Explanation:
see explanation below.
Explanation
* echo "1" >/proc/sys/net/ipv4/ip_forward
* vi /etc/sysctl.conf
net.ipv4.ip_forward = 1
If you want to use the Linux System as a Router to make communication between different networks, you need enable the IP forwarding. To enable on running session just set value 1 to
/proc/sys/net/ipv4/ip_forward. As well as automatically turn on the IP forwarding features on next boot set on
/etc/sysctl.conf file.
NEW QUESTION 36
......
Updated Verified Pass EX200 Exam - Real Questions and Answers: https://www.exam4labs.com/EX200-practice-torrent.html
Best Way To Study For RedHat EX200 Exam Brilliant EX200 Exam Questions PDF: https://drive.google.com/open?id=1bwcZczFzhOFXJZC78dUc7EpSl-utklMy