[Sep 03, 2022] VCS-278 Exam Dumps - Veritas Practice Test Questions [Q81-Q106]

Share

[Sep 03, 2022] VCS-278 Exam Dumps - Veritas Practice Test Questions

New Real VCS-278 Exam Dumps Questions

NEW QUESTION 81
An administrator notices that backups are failing for clients added to a new backup policy. The backups attempt to run again after 10 minutes.
How can the administrator modify the time between backup attempts?

  • A. modify the "Take checkpoints every" value in the backup policy
  • B. modify the "Job retry delay" host property
  • C. modify the "Schedule backup attempts" host property
  • D. modify the "Policy update interval" host property

Answer: C

Explanation:
Explanation/Reference:

 

NEW QUESTION 82
An administrator took media server mediaA offline for maintenance and set up a new media server mediaB with access to the previously backed up data. When restores are performed for data that was backed up by mediaA, the restores fail.
Which setting must the administrator modify to allow successful restores?

  • A. set "Enable unrestricted media sharing for all media servers" in the master server host properties in the Media section
  • B. verify both media servers are set up in the master server host properties in the "Restore Failover" section
  • C. from the master server, run bpimage to change the host name of the media server from mediaA to mediaB
  • D. in the BAR console, change the "Server to use for backup and restores" setting to mediaB

Answer: B

 

NEW QUESTION 83
Refer to the exhibit.
The following Storage Lifecycle Policy was used to back up data from a client. All duplication jobs have completed, and none of the backups have expired.
How should an administrator restore data from the tape using NetBackup?

  • A. from the NetBackup Administration Console, promote copy 1 to the primary copy.
  • B. from the NetBackup Administration Console, promote copy 2 to the primary copy.
  • C. from the BAR console, select the tape backup to restore from.
  • D. from the BAR console, start the restore and NetBackup will automatically select the tape copy.

Answer: B

Explanation:
Explanation

 

NEW QUESTION 84
Refer to the exhibit.
Two media servers, sharing a library with 6 tape drives, exist in the NetBackup environment displayed in the exhibit. Both weekly Full and daily Differential Incremental backups need to run for the clients and each schedule has a different retention period. Because of network topology, some clients back up to Media server 1and some back up to Media server 2.The environment suffers from multiple status 96 failures during the backup window.

How can the administrator minimize the number of failures?

  • A. increase the "Media unmount delay"
  • B. enable backups to span tape media
  • C. enable media sharing
  • D. configure media multiplexing

Answer: C

 

NEW QUESTION 85
An administrator creates a Storage Lifecycle Policy (SLP) to take advantage of optimized duplication. The backup and subsequent duplication jobs launch as configured in the SLP.
What may cause the secondary duplication job to run as non-optimized?

  • A. Both source and destination storage servers have only one media server in common.
  • B. Both compression and encryption attributes are disabled in the backup policy.
  • C. Optimized duplication requires the media servers to be configured as Fibre Transport media servers.
  • D. Optimized duplication is unsupported when a storage unit group is the target of the duplication.

Answer: C

 

NEW QUESTION 86
Refer to the Exhibit.
An administrator has created a policy that has three new Full schedules as shown in the exhibit. All the schedules are set to run on Friday, from 0200 to 0600.
What is the order of priority for the schedules on Friday?

  • A. Full-Weekly > Full-Monthly > Full-Quarterly
  • B. Full-Quarterly > Full-Monthly > Full-Weekly
  • C. Full-Quarterly > Full-Weekly > Full-Monthly
  • D. Full-Monthly > Full-Weekly > Full-Quarterly

Answer: A

 

NEW QUESTION 87
Refer to the exhibit.
A backup policy uses a Full Backup schedule with a schedule type of Frequency: 1 days. The start window for the schedule is configured as shown in the exhibit:

The administrator runs a manual backup at 10:00 on Thursday.
When would the next backup run, if all prior backups completed successfully?

  • A. Monday at 2:00
  • B. Friday at 10:00
  • C. Monday at 10:00
  • D. Friday at 2:00

Answer: D

 

NEW QUESTION 88
Which is not valid media state?

  • A. Empty
  • B. Frozen
  • C. Full
  • D. Suspended

Answer: A

Explanation:
EMPTY is not a valid status.

 

NEW QUESTION 89
Prior to initiating a restore , an administrator realize that media needed for the restore was written By a server that is unavailable. The administrator does have another server that can performs that restore and that is connected to the same library.
Which two commands can the administrator performs to change the server over ship, so the restore can be performed?

  • A. Bpimage
  • B. Bpmedia
  • C. bpimport
  • D. Bpimage list
  • E. Bpimmedis

Answer: A,C

 

NEW QUESTION 90
An MSDP media server is experiencing performance issues when running multiple deduplication backup jobs concurrently over 10 GbE. When switched to AdvancedDisk on the same media server, the backups perform well.
Which step can be utilized to mitigate the performance issues?

  • A. increase the "Job priority" on the MSDP backup policy
  • B. increase the "Maximum concurrent jobs" for the MSDP storage unit
  • C. add load balancing media servers for the storage server
  • D. increase the size of the MSDP disk pool on the storage server

Answer: C

Explanation:
Explanation/Reference:

 

NEW QUESTION 91
An administrator navigates to NetBackup Management > Catalog, and selects Action: Import. After clicking the Search Now button, the following message appears:

Which step must the administrator perform in order to get search results?

  • A. run the Initiate Import command in the Catalog > Action menu
  • B. run the "Recover the catalogs" wizard
  • C. increase the "Catalog cleanup wait time" in the Clean-up host property
  • D. enable Catalog > Override default priority, and increase the Job Priority value

Answer: A

 

NEW QUESTION 92
Which two NetBackup features are available to protect the MSDP catalog? (Choose two.)

  • A. NetBackup catalog backups
  • B. MSDP shadow copies
  • C. Optimized Catalog Duplication
  • D. MSDP catalog policy
  • E. Checkpoints

Answer: A,B

 

NEW QUESTION 93
An administrator is attempting to start Netbackup services on a master server success. When verifying the database is up using the nbdb_ping command, the administrator receives the following error:
Database (NBDB) is not available
Which log file should the administrator analyze to determine why Netbackup Database fails to start?

  • A. server.log
  • B. Nbdb.log
  • C. mm.log
  • D. Nbdbms.log

Answer: A

Explanation:
Explanation
https://www.veritas.com/support/en_US/article.100029920

 

NEW QUESTION 94
Refer to the Exhibit.
An administrator is trying to access client properties on the NetBackup Administration Console and receives the following message:

When checking the services on the master server, the administrator sees that the PBX service is down.
Which two commands can the administrator use to increase the PBX log level to determine the reason for the message above? (Choose two.)

  • A. vxlogcfg
  • B. pbxcfg
  • C. vxlogmgr
  • D. pbx_exchange
  • E. vxpbx_exchanged

Answer: A,C

 

NEW QUESTION 95
The NetBackup Resource Broker (NBRB) maintains resource requests for jobs that are queued.
Which two criteria does NBRB use to evaluate the resource requests and provide resources to each job sequentially? (Choose two.)

  • A. data classification rank ID
  • B. time when NBRB receives the request
  • C. job priority
  • D. date of last successful backup
  • E. retention level

Answer: B,C

 

NEW QUESTION 96
A NetBackup policy is configured to back up the following paths for a client:

Multi-streaming is enabled for the backups, and multiplexing is set to 4. Backup streams are running slowly.
Which step should the administrator consider to improve backup performance?

  • A. increase the multiplexing level.
  • B. back up only one stream from each physical device on the client.
  • C. disable multistreaming.
  • D. increase the number of data buffers.

Answer: B

 

NEW QUESTION 97
To reduce network use by limiting the number of parallel backup streams, which cloud setting should be modified under the Scalable Storage host property?

  • A. Throttling > Sampling interval
  • B. Network Connections > Maximum concurrent jobs
  • C. Throttling > Total available bandwidth
  • D. Metering > Metering interval

Answer: B

 

NEW QUESTION 98
An administrator has a job that has failed. Upon reviewing the Detailed Status tab for the job, the administrator sees the following information:

Which setting value prevented the job from running during the backup window?

  • A. the Global Attributes > "Maximum jobs per client" master server host property
  • B. the "Maximum concurrent jobs" storage unit setting
  • C. the Timeouts > "Client read timeout" master server host property
  • D. the "Limit jobs per policy" policy setting

Answer: A

 

NEW QUESTION 99
Which parameter in NetBackup Management > Host Properties must be modified to change the logging level to 5 for the NetBackup client named clientl.example.com?

  • A. set the "Global logging level" in the master server host properties.
  • B. enable "Logging for critical processes" in the client host properties.
  • C. enable "Logging for critical processes" in the master server host properties.
  • D. set the "Global logging level" in the client host properties.

Answer: A

Explanation:
Explanation/Reference:

 

NEW QUESTION 100
Which statement is false about NetBackup deduplication?

  • A. Deduplication can be performed at the disk block level.
  • B. Media server deduplication has only been available since NetBackup 7.0.
  • C. Deduplication uses a capacity-based license.
  • D. Fingerprinting of data can be performed on the server side as well as the client side.

Answer: A

Explanation:
Deduplication can be performed at the file and sub-file or segment level.

 

NEW QUESTION 101
Which backup storage is unsupported with media server load balancing?

  • A. Media Manager storage
  • B. Media Server Deduplication Pool
  • C. BasicDisk
  • D. AdancedDisk

Answer: C

 

NEW QUESTION 102
A NetBackup master server has commenced writing four long-running duplication jobs to an AdvancedDisk disk pool. The value of "Maximum concurrent jobs" for the storage unit and "Limit I/O streams" for the disk pool are both set to 4.
There are 35 jobs queued on the master server that require this disk pool: 5 replication jobs with priority 9999
10 backup jobs with priority 999
20 duplication jobs with priority 99
Two restore jobs that require this disk pool are then submitted with default priority. Which job type goes active next?

  • A. Duplication
  • B. Restore
  • C. Backup
  • D. Replication

Answer: B

 

NEW QUESTION 103
An administrator wants deduplication clients in a remote office to perform backup so less data is sent Over the wide area network (WAN). Which action should the administrator perform to reduce the total amount of data sent over the WAN?

  • A. Enable deduplication stream handlers for the clients
  • B. Set client attributes to ''Always use the media server''
  • C. Set client attributes to ''Always use client-side deduplication''
  • D. Set the deduplication disk pool to ''Limit I/O streams''

Answer: C

 

NEW QUESTION 104
An administrator has a backup policy with the following policy attributes:
3 paths listed in the Backup Selections list
5 clients listed in the Clients list
"Allow multiple data streams" is selected
"Limit jobs per policy" is set to 4
How many jobs go Active when the job is started, excluding parent jobs, assuming there are enough storage resources to handle the expected jobs?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: C

 

NEW QUESTION 105
Which information is validated during an image verification operation?

  • A. data on the client and the backup storage is validated with data in the NetBackup catalog
  • B. data on the backup storage is validated with data in the NetBackup catalog
  • C. data on the master server is validated with data in the NetBackup catalog
  • D. data on the client is validated with data in the NetBackup catalog

Answer: B

 

NEW QUESTION 106
......

Pass Your VCS-278 Exam Easily with Accurate PDF Questions: https://www.exam4labs.com/VCS-278-practice-torrent.html