Latest Fortinet NSE7_OTS-7.2 First Attempt, Exam real Dumps Updated [May-2026]
Get the superior quality NSE7_OTS-7.2 Dumps Questions from Exam4Labs. Nobody can stop you from getting to your dreams now. Your bright future is just a click away!
NEW QUESTION # 31
Refer to the exhibit. You are creating a new operational technology (OT) rule to monitor Modbus protocol traffic on FortiSIEM.
Which action must you take to ensure that all Modbus messages on the network match the rule?
- A. In the Aggregate section, set the attribute value to equal to or greater than 0.
- B. In the Group By section, remove all attributes that are not configured in the Filter section.
- C. Add a new condition to filter Modbus traffic based on the source TCP/UDP port.
- D. The condition on the SubPattern filter must use the AND logical operator.
Answer: A
Explanation:
The current Aggregate condition is set to COUNT(Matched Events) >= 1, which only triggers the rule after at least one event. To ensure all Modbus messages (including the first one) match the rule, the condition must be >= 0, so every event is considered, including the very first occurrence.
NEW QUESTION # 32
Refer to the exhibit.
An OT architect has implemented a Modbus TCP with a simulation server Conpot to identify and control the Modus traffic in the OT network. The FortiGate-Edge device is configured with a software switch interface ssw-01.
Based on the topology shown in the exhibit, which two statements about the successful simulation of traffic between client and server are true? (Choose two.)
- A. NAT is disabled in the FortiGate firewall policy from port3 to ssw-01.
- B. The FortiGate-Edge device must be in NAT mode.
- C. Port5 is not a member of the software switch.
- D. The FortiGate devices is in offline IDS mode.
Answer: A,B
NEW QUESTION # 33
Refer to the exhibit.
PLC-3 and CLIENT can send traffic to PLC-1 and PLC-2. FGT-2 has only one software switch (SSW-1) connecting both PLC-3 and CLIENT. PLC-3 and CLIENT can send traffic to each other at the Layer 2 level.
What must the OT admin do to prevent Layer 2-level communication between PLC-3 and CLIENT?
- A. Set a unique forward domain for each interface of the software switch.
- B. Implement policy routes on FGT-2 to control traffic between devices.
- C. Enable explicit intra-switch policy to require firewall policies on FGT-2.
- D. Create a VLAN for each device and replace the current FGT-2 software switch members.
Answer: A,D
NEW QUESTION # 34
Refer to the exhibit.
You need to configure VPN user access for supervisors at the breach and HQ sites using the same soft FortiToken. Each site has a FortiGate VPN gateway.
What must you do to achieve this objective?
- A. You must use a third-party RADIUS OTP server.
- B. You must use a FortiAuthenticator.
- C. You must register the same FortiToken on more than one FortiGate.
- D. You must use the user self-registration server.
Answer: B
NEW QUESTION # 35
Refer to the exhibit.
An OT network security audit concluded that the application sensor requires changes to ensure the correct security action is committed against the overrides filters.
Which change must the OT network administrator make?
- A. Change the security action of the industrial category to monitor.
- B. Set all application categories to apply default actions.
- C. Set the priority of the C.BO.NA.1 signature override to 1.
- D. Remove IEC.60870.5.104 Information.Transfer from the first filter override.
Answer: C
Explanation:
Explanation
According to the Fortinet NSE 7 - OT Security 6.4 exam guide1, the application sensor settings allow you to configure the security action for each application category andnetwork protocol override. The security action determines how the FortiGate unit handles traffic that matches the application category or network protocol override. The security action can be one of the following:
Allow: The FortiGate unit allows the traffic without any further inspection.
Monitor: The FortiGate unit allows the traffic and logs it for monitoring purposes.
Block: The FortiGate unit blocks the traffic and logs it as an attack.
The priority of the network protocol override determines the order in which the FortiGate unit applies the security action to the traffic. The lower the priority number, the higher the priority. For example, a priority of 1 is higher than a priority of 10.
In the exhibit, the application sensor has the following settings:
The industrial category has a security action of allow, which means that the FortiGate unit will not inspect or log any traffic that belongs to this category.
The IEC.60870.5.104 Information.Transfer network protocol override has a security action of block, which means that the FortiGate unit will block and log any traffic that matches this protocol.
The IEC.60870.5.104 Control.Functions network protocol override has a security action of monitor, which means that the FortiGate unit will allow and log any traffic that matches this protocol.
The IEC.60870.5.104 Start/Stop network protocol override has a security action of allow, which means that the FortiGate unit will not inspect or log any traffic that matches this protocol.
The IEC.60870.5.104 Transfer.C.BO.NA.1 network protocol override has a security action of block, which means that the FortiGate unit will block and log any traffic that matches this protocol.
The problem with these settings is that the IEC.60870.5.104 Transfer.C.BO.NA.1 network protocol override has a lower priority than the IEC.60870.5.104 Information.Transfer network protocol override. This means that if the traffic matches both protocols, the FortiGate unit will apply the security action of the higher priority override, which is block. However, the IEC.60870.5.104 Transfer.C.BO.NA.1 protocol is used to transfer binary outputs, which are essential for controlling OT devices. Therefore, blocking this protocol could have negative consequences for the OT network.
To fix this issue, the OT network administrator must set the priority of the IEC.60870.5.104 Transfer.C.BO.NA.1 network protocol override to 1, which is higher than the priority of the IEC.60870.5.104 Information.Transfer network protocol override. This way, the FortiGate unit will apply the security action of the lower priority override, which is allow, to the traffic that matches both protocols. This will ensure that the FortiGate unit does not block the traffic that is used to transfer binary outputs, while still blocking the traffic that is used to transfer information.
1: NSE 7 Network Security Architect - Fortinet
NEW QUESTION # 36
When you create a user or host profile, which three criteria can you use? (Choose three.)
- A. Location
- B. Host or user attributes
- C. Administrative group membership
- D. Host or user group memberships
- E. An existing access control policy
Answer: A,B,D
Explanation:
https://docs.fortinet.com/document/fortinac/9.2.0/administration-guide/15797/user-host-profiles
NEW QUESTION # 37
An OT network architect must deploy a solution to protect fuel pumps in an industrial remote network. All the fuel pumps must be closely monitored from the corporate network for any temperature fluctuations.
How can the OT network architect achieve this goal?
- A. Configure a fuel server on the corporate network, and deploy a FortiSIEM with a single pattern temperature performance rule on the remote network.
- B. Configure a fuel server on the remote network, and deploy a FortiSIEM with a single pattern temperature security rule on the corporate network.
- C. Configure a fuel server on the remote network, and deploy a FortiSIEM with a single pattern temperature performance rule on the corporate network.
- D. Configure both fuel server and FortiSIEM with a single-pattern temperature performance rule on the corporate network.
Answer: C
Explanation:
Explanation
This way, FortiSIEM can discover and monitor everything attached to the remote network and provide security visibility to the corporate network
NEW QUESTION # 38
Refer to the exhibit.
You are creating a new operational technology (OT) rule to monitor Modbus protocol traffic on FortiSIEM Which action must you take to ensure that all Modbus messages on the network match the rule?
- A. In the Group By section remove all attributes that are not configured in the Filter section
- B. The condition on the SubPattern filter must use the AND logical operator
- C. the Aggregate section, set the attribute value to equal to or greater than 0
- D. Add a new condition to filter Modbus traffic based on the source TCP/UDP port
Answer: D
NEW QUESTION # 39
With the limit of using one firewall device, the administrator enables multi-VDOM on FortiGate to provide independent multiple security domains to each ICS network. Which statement ensures security protection is in place for all ICS networks?
- A. Each VDOM must have an independent security license.
- B. Traffic between VDOMs must pass through the physical interfaces of FortiGate to check for security incidents.
- C. The management VDOM must have access to all global security services.
- D. Each traffic VDOM must have a direct connection to FortiGuard services to receive the required security updates.
Answer: B
NEW QUESTION # 40
An OT supervisor has configured LDAP and FSSO for the authentication. The goal is that all the users be authenticated against passive authentication first and, if passive authentication is not successful, then users should be challenged with active authentication.
What should the OT supervisor do to achieve this on FortiGate?
- A. Configure a firewall policy with LDAP users and place it on the top of list of firewall policies.
- B. Under config user settings configure set auth-on-demand implicit.
- C. Configure a firewall policy with FSSO users and place it on the top of list of firewall policies.
- D. Enable two-factor authentication with FSSO.
Answer: C
Explanation:
The OT supervisor should configure a firewall policy with FSSO users and place it on the top of list of firewall policies in order to achieve the goal of authenticating users against passive authentication first and, if passive authentication is not successful, then challenging them with active authentication.
NEW QUESTION # 41
Refer to the exhibit. You need to configure VPN user access for supervisors at the branch and HQ sites using the same soft FortiToken. Each site has a FortiGate VPN gateway.
What must you do to achieve this objective?
- A. Deploy FortiAuthenticator.
- B. Use a RADIUS OTP server.
- C. Import the FortiToken on each FortiGate.
- D. Direct users to the self-registration server portal.
Answer: A
Explanation:
A single soft FortiToken can be validated by multiple FortiGate VPN gateways only when token authentication is centralized. FortiAuthenticator provides that central OTP/RADIUS service, so both FortiGates query the same token record for the supervisors.
NEW QUESTION # 42
Which three protocols are used as industrial Ethernet protocols? (Choose three.)
- A. EtherNet/IP
- B. M12
- C. EtherCAT
- D. PROFINET
- E. RJ45
Answer: A,C,D
NEW QUESTION # 43
Refer to the exhibit. The network topology in the exhibit shows FortiGate devices as well as FortiAnalyzer and FortiSIEM for the OT network.
Which two steps must you take to configure logging on the OT network'? (Choose two.)
- A. Configure FortiSIEM to send logs and alerts to FortiAnalyzer.
- B. Configure FortiGate to send logs to FortiAnalyzer and FortiSIEM.
- C. Configure FortiGate and FortiAnalyzer to send industrial signature patterns to FortiSIEM.
- D. Configure FortiAnalyzer to send security events to FortiSIEM.
Answer: B,D
Explanation:
FortiGates must forward their logs directly to both FortiAnalyzer and FortiSIEM for storage and correlation. FortiAnalyzer then forwards relevant security events to FortiSIEM, enabling centralized analytics across OT devices.
NEW QUESTION # 44
An OT architect has deployed a Layer 2 switch in the OT network at Level 1 in the Purdue model- process control. The purpose of the Layer 2 switch is to segment traffic between PLC1 and PLC2 with two VLANs.
All the traffic between PLC1 and PLC2 must first flow through the Layer 2 switch and then through the FortiGate device in the Level 2 supervisory control network.
Which statement about the traffic between PLC1 and PLC2 is true?
- A. In order to communicate, PLC1 must be in the same VLAN as PLC2.
- B. The Layer 2 switches routes any traffic to the FortiGate device through an Ethernet link.
- C. The Layer 2 switch rewrites VLAN tags before sending traffic to the FortiGate device.
- D. PLC1 and PLC2 traffic must flow through the Layer-2 switch trunk link to the FortiGate device.
Answer: D
Explanation:
Since PLC1 and PLC2 are segmented into two VLANs on a Layer 2 switch, traffic between them requires inter-VLAN routing.
The Layer 2 switch handles VLAN segmentation but does not route traffic between VLANs.
For communication between VLANs, traffic must be sent to a router or Layer 3 device-in this case, the FortiGate device in the Layer 2 supervisory control network.
The traffic flows from PLCs to the Layer 2 switch and then over a trunk link (carrying VLAN tags) to the FortiGate, which performs inter-VLAN routing.
The trunk link allows multiple VLAN-tagged traffic to be carried between the Layer 2 switch and the FortiGate for routing.
Options regarding VLAN tags rewriting or requiring PLCs to be in the same VLAN are incorrect because VLAN tagging remains consistent on trunk links and PLCs are intentionally segmented.
NEW QUESTION # 45
The operational technology (OT) network analyst runs different levels of reports to investigate threats that exploit the network. The analyst can run these reports on all routers, switches, and firewalls.
Which FortiSIEM reporting method can analysts use to identify threats that exploit image firmware files?
- A. CMDB reports
- B. OT/loT reports
- C. Compliance reports
- D. Threat hunting reports
Answer: D
Explanation:
Threat hunting reports let analysts query events and indicators (like anomalous firmware image access/use) across routers, switches, and firewalls, revealing exploits targeting firmware files.
NEW QUESTION # 46
Which two frameworks are common to secure ICS industrial processes, including SCADA and DCS? (Choose two.)
- A. Modbus
- B. NIST Cybersecurity
- C. IEC104
- D. IEC 62443
Answer: C,D
NEW QUESTION # 47
An OT network architect needs to secure control area zones with a single network access policy to provision devices to any number of different networks.
On which device can this be accomplished?
- A. FortiGate
- B. FortiNAC
- C. FortiSwitch
- D. FortiEDR
Answer: A
Explanation:
An OT network architect can accomplish the goal of securing control area zones with a single network access policy to provision devices to any number of different networks on a FortiGate device.
NEW QUESTION # 48
......
Fortinet Practice Test Engine with NSE7_OTS-7.2 Questions: https://drive.google.com/open?id=1mNUu7uU_IsXOxZFPRWbWqKYTb5O4_Ske
Guaranteed Success with Valid Fortinet NSE7_OTS-7.2 Dumps: https://www.exam4labs.com/NSE7_OTS-7.2-practice-torrent.html