Pass CompTIA SK0-004 PDF Dumps | Recently Updated 778 Questions
Updated Test Engine to Practice SK0-004 Dumps & Practice Exam
Preparation Process for CompTIA SK0-004 Exam
One of the best things about the CompTIA SK0-004 exam is that finding the relevant study materials for it is quite simple. Everything that you will ever need to study for this test can be found on the CompTIA website and that is why it is a great place to start. There are various books and study guides that you can use to prepare for this exam and you can find them directly on the official platform. Some of the books that you can use are as follows:
- CompTIA Server+ Study Guide by Troy McMillan
- CompTIA Server+ by Daniel Lachance
When you visit the CompTIA website, you will also find other resources such as virtual labs that will prove to be invaluable. With the help of these labs, you will get a lot of practical exposure, which is a must when you want to pass the exam with flying colors. There is also an instructor-led training course that will help you understand each and every topic in detail. It is taught and prepared by the industry experts. It is recommended that you use all of the above-mentioned tools in tandem to achieve the best result.
CompTIA SK0-004: Target Audience and Prerequisites
The CompTIA SK0-004 exam is designed for those IT specialists who have experience supporting PC hardware and want to gain the knowledge and skills needed to become a Server Hardware & Support Professional, including an IT/Server Technician.
There are no formal requirements for attempting the CompTIA SK0-004 exam. However, if you want to increase your performance in this certification test, you should have 18-24 months of practical experience in installing, configuring, diagnosing, and troubleshooting PC hardware and network operating system issues. In addition, the applicants for this exam are advised to earn the CompTIA A+ certificate.
NEW QUESTION 98
A technician is asked to install an additional NIC in a server. Which of the following hardware considerations would be BEST for the technician to make?
- A. CPU stepping
- B. Power consumption
- C. Bus type and speed
- D. CAS latency
Answer: C
NEW QUESTION 99
Which of the following multifactor authentication methods does the smart card satisfy?
- A. Something you are
- B. Something you look like
- C. Something you know
- D. Something you have
Answer: D
NEW QUESTION 100
An administrator identifies that a server is shutting down. The administrator powers up the server and OS loads but after a few minutes it powers down again. Which of the following is the cause?
- A. Redundant power supply failure
- B. CPU overheating
- C. Hard disk failure
- D. Memory failure
Answer: B
Explanation:
Explanation
NEW QUESTION 101
A systems administrator backs up company data to the public cloud as part of a disaster recovery plan.
Which of the following BEST describes this replication method?
- A. Peer-to-peer
- B. Site-to-site
- C. Server-to-client
- D. Disk-to-disk
Answer: B
NEW QUESTION 102
A telephone company is responsible for maintaining a list of 25 million names and phone numbers for inclusion in printed phone books as well as in an inline phone directory accessible on the company's website.
Which of the following types of servers would be MOST appropriate to store its information?
- A. Database server
- B. Web server
- C. Directory server
- D. File server
Answer: C
NEW QUESTION 103
An emergency power off accidentally occurs in a datacenter during a fire alarm test. On recovery, the server administrator notices that an external storage array is performing consistency checks on all the volumes configured in the array. Which of the following components of the storage array has MOST likely failed or faulted?
- A. Cold spare drive
- B. Cache memory modules
- C. Redundant controller
- D. Battery backed cache
Answer: D
NEW QUESTION 104
A technician is asked to install three servers: a 1U, a 4U, and a 6U. Which of the following is the MOST correct order to install these servers starting from the top of the rack?
- A. 4U, 1U, 6U
- B. 4U, 6U, 1U
- C. 1U, 4U, 6U
- D. 6U, 4U, 1U
Answer: C
Explanation:
Explanation/Reference:
NEW QUESTION 105
Which of the following best practices should an administrator use to build a database server?
- A. The transaction log files should be compressed.
- B. The transaction log files should be on a journaling filesystem.
- C. The transaction log files should be on a separate volume.
- D. The transaction log files should be on the system volume.
Answer: B
NEW QUESTION 106
A technician is installing a new blade chassis in a datacenter. While connecting the device, it is discovered that there is only one Ethernet port on the back of the chassis. After consulting the parts list, the technician realizes something is missing from the order. Which of the following components is MOST likely missing?
- A. Backplane
- B. Management module
- C. Midplane
- D. Network module
Answer: D
NEW QUESTION 107
Which of the following BEST describes a benefit of RAID 0?
- A. High performance
- B. High fault tolerance
- C. No configuration
- D. Ease of failure recovery
Answer: A
NEW QUESTION 108
A system administrator is tasked to setup a database server with failover clustering feature enabled.
One of the requirements is to have one database running at all times with data being synchronized and replicated to the idle database in case the primary database server fails. Both servers will be monitored by a witness on a LUN. Which of the following cluster techniques should be implemented to meet these requirements?
- A. Active/Passive
- B. Active/Active
- C. Single Local Quorum
- D. Shared Multiple Quorum
- E. Passive/Passive
Answer: A
NEW QUESTION 109
A server administrator recently applied a local policy to a computer with gpedit.msc. However, the policy keeps reverting back to its original setting the next day. The server administrator is unaware of what is causing this issue. Which of the following BEST describes what is occurring?
- A. Another administrator is playing a prank by logging in to the machine and reverting the change
- B. A group policy is overriding the local policies on the next group policy refresh
- C. A startup script is running at boot that is reverting the registry key
- D. The antivirus program installed on the system is blocking access to the Program Files directory
Answer: B
NEW QUESTION 110
A server in a small company functions as a print server. Suddenly it stops sending print jobs to the printers. A technician verifies that the printers are working correctly. Additionally, the print spooler had been restarted and is running on the server, it is accessible from workstations, and it shows as being ready to accept print jobs.
Which of the following has MOST likely caused the print server to stop processing print jobs?
- A. The print quota has been exceeded.
- B. The server needs pooling enabled.
- C. The server's hard drive is out of space.
- D. The server needs an updated print driver.
Answer: C
NEW QUESTION 111
In a PKI, which of the following represents the top level of a certificate authority?
- A. Root CA
- B. Subordinate CA
- C. Delegated CA
- D. Intermediate CA
Answer: A
NEW QUESTION 112
Which of the following media types is the MOST durable in harsh environments?
- A. Optical
- B. Disk
- C. Flash
- D. Tape
Answer: C
NEW QUESTION 113
Which of the following is the purpose of an NTP server?
- A. For synchronizing clocks on network devices
- B. For hosting instant messaging applications
- C. For file sharing and collaboration
- D. For hosting newsgroups
Answer: A
NEW QUESTION 114
An administrator has installed an OS on a server. The administrator is able to ping directory server by IP address but is unable to join the domain. Which of the following could be causing the problem?
- A. Misconfigured DNS settings
- B. MAC address conflict
- C. Incorrect subnet mask
- D. IP address conflict
- E. Incorrect default gateway
Answer: A
NEW QUESTION 115
A technician wants to disable USB ports on the server to prevent booting from a flash drive. Which of the following actions should the technician take to accomplish this task?
- A. Disable the USB ports on BIOS setup
- B. Disable the USB ports on Device Manager
- C. Disable the USB ports on UAC
- D. Disable the USB ports on Control Panel
Answer: A
NEW QUESTION 116
As a best practice, which of the following should be determined prior to provisioning a server? (Select TWO).
- A. Hostname
- B. User accounts
- C. Group accounts
- D. Domain name
- E. IP address
- F. MAC address
Answer: A,E
Explanation:
Explanation
NEW QUESTION 117
Which of the following server types stores the list of network usernames and passwords required for authentication?
- A. SNMP
- B. Directory
- C. DHCP
- D. File server
Answer: B
NEW QUESTION 118
An administrator receives a call from a user who is unable to receive email. After troubleshooting the administrator is able to resolve the issue and verify that user is able to access email again.
Which of the following is the NEXT step that the administrator should take?
- A. Close the issue.
- B. Other users to make sure they are not having the same issue.
- C. Document the outcome.
- D. Implement preventative measures.
Answer: C
NEW QUESTION 119
Which of the following assists with airflow in a server? (Select TWO).
- A. Shroud
- B. Baffle
- C. Heat sinks
- D. Water cooling
- E. Riser cards
Answer: A,B
NEW QUESTION 120
Which of the following file types can Microsoft servers package for remote installation by default?
- A. .ini
- B. .exe
- C. .msi
- D. .dll
Answer: C
NEW QUESTION 121
......
Topics Covered in CompTIA SK0-004 Exam
The CompTIA SK0-004 exam checks the knowledge and skills of the professionals in a wide range of topics. The domains covered in this certification test are outlined below.
The first topic is ‘Server Architecture’ that makes up 12% of the exam content. The subtopics are as follows: explaining the purpose and function of server form factors; installing, configuring, and maintaining server elements; comparing and contrasting power & cooling components. Then there is the ‘Server Administration’ section that covers 24% of the entire content. It includes the following areas: installing and configuring server operating systems; comparing and contrasting server roles as well as requirements; utilizing access and control methods to administer a server; executing proper server maintenance techniques; explaining the role of asset management & documentation; explaining the role and operation of virtualization elements.
The next domain is ‘Storage’ and it constitutes 12% of the exam syllabus. The subtopics include installing as well as deploying primary storage devices depending on particular specifications & interfaces; configuring RAID with the help of best practices; summarizing features & hardware of various storage technologies; calculating proper storage capacity & plan for future development. The ‘Security’ area makes up 13% of the whole content and includes the subtopics, such as comparing and contrasting physical security methods & concepts; applying server hardening techniques; explaining fundamental network security systems & protocols; implementing logical access control methods according to company policy; implementing proper environmental techniques & controls.
The next subject area is ‘Networking’ (10%) that includes the following subtopics: customizing servers to use IP addressing & network infrastructure services; comparing and contrasting various ports & protocols; installing cables as well as implementing proper cable management procedures. ‘Disaster Recovery’ comes next and constitutes 9% of the exam content. This domain includes explaining the role of disaster recovery methodologies as well as applying the appropriate backup techniques. The last topic is ‘Troubleshooting’ and it makes up the remaining 20% of the entire content. The subtopics are as follows: troubleshooting theory & methodologies; troubleshooting hardware problems, selecting the appropriate tools & methods; troubleshooting software problems, selecting the appropriate tools & methods; diagnosing network problems, selecting the appropriate tools & methods; troubleshooting storage problems, selecting the appropriate tools & methods; diagnosing security problems, selecting the appropriate tools & methods.
CompTIA SK0-004 Dumps Cover Real Exam Questions: https://www.exam4labs.com/SK0-004-practice-torrent.html