[Jan-2022] The Best Aruba-ACMP HPE6-A71 Professional Exam Questions [Q62-Q80]

Share

[Jan-2022] The Best Aruba-ACMP HPE6-A71 Professional Exam Questions

Try 100% Updated HPE6-A71 Exam Questions [2022]


For more info read reference:

Course Training


Difficulty in writing the HP HPE6-A71: Aruba Certified Mobility Professional Exam

HP HPE6-A71: Aruba Certified Mobility Professional Certification is a most privileged achievement one could be graced with. It is one of the highest levels of certification in the SAS. This Certification consisting of real-time scenarios and practical experience which make it difficult for the candidate to get through with the HPE6-A71 Implementing Aruba Campus Switching Solutions Exam. If the candidates have proper preparation material to pass the HP HPE6-A71: Aruba Certified Mobility Professional exam with good grades. Questions answers and clarifications which are designed in form of Exam4Labs dumps make sure to cover the entire course content. Exam4Labs have a brilliant HPE6-A71 dumps pdf with the foremost latest and vital queries and answers in PDF format. Exam4Labs is sure about the exactness and legitimacy of HPE6-A71 practice tests in this manner. Candidates can easily pass the HP HPE6-A71: Aruba Certified Mobility Professional Exam with genuine HP HPE6-A71: Aruba Certified Mobility Professional dumps and gets HP HPE6-A71: Aruba Certified Mobility Professional certification skillful surely. These dumps are viewed as the best source to understand the HP HPE6-A71: Aruba Certified Mobility Professional Certification well by simply perusing these example questions and answers. If the candidate completes practice the exam with certification HPE6-A71 dumps along with self-assessment to get the proper idea on Google accreditation and to ace the certification exam.


How to Prepare for HP HPE6-A71: Aruba Certified Mobility Professional Exam

Preparation Guide for HP HPE6-A71: Aruba Certified Mobility Professional Exam

Introduction

It was founded on November 1, 2015, as part of Hewlett Packard company’s scattering. HPE is a market-oriented organization that operates in two divisions: The Enterprise Group, which works in a range of servers, storage, networking, consultations, and services, and the Financial Service (FSS) Group, which is a leading global information technology organization, located in Santos, CA and a global leader in business technology. HPE announced annual sales of $29 billion in FY2019 on October 31, down 5,57% from the previous time of year. This exam tests your skills with the WLAN design, deployment, and troubleshooting of Aruba Mobile First Network Solutions in complex highly available campus and branch environments. It also tests your ability to configure specialized applications, management, and security requirements for a WLAN such as UCC Voice and advanced security features.

The split was arranged to change the name of the former Hewlett-Packard corporation into HP Inc. and convert it into a new business. HP kept the old HP machine and print company and its stock price background as well as the original Hewlett-Packard NYSE symbol; the Corporation trades under its ticker symbol: HPE. HP Inc. HPE’s income was marginally lower than that of HP Inc, according to the 2015 notes. In 2017, the Computer Science Company extended its Enterprise Services business to DXC technology. It also extended and combined the software business with Micro Focus. In 2018 Fortune 500, HPE was ranked No 107 among the largest US companies with total profits.

 

NEW QUESTION 62
An administrator wants to reduce downtime of the wireless network when controllers are upgraded. Which Aruba OS feature should the administrator implement to reduce the amount of downtime the Aps will experience at the time of the upgrade process?

  • A. AP image preload
  • B. AP fast start
  • C. AP apboot mode bypass
  • D. Centralized upgrades

Answer: A

 

NEW QUESTION 63
Refer to the exhibit.

An administrator wants to centralize administrative access to the Aruba Mobility Controllers (MC) and Mobility Master (MM). ClearPass is set up and the preferred authentication protocols is TACACS+. Where should the administrator perform this configuration in the MM hierarchy shown in the exhibit?

  • A. At the controller levels
  • B. At the two campus levels
  • C. At the Managed Network level
  • D. At both the Mobility Master and Managed Network levels

Answer: C

 

NEW QUESTION 64
An administrator wants to dynamically upgrade AppRF on Aruba Mobility Controllers (MC) in a cluster. The administrator does not want to reboot the system at the time of the upgrade.
What should the administrator use for this upgrade?

  • A. Upgrade Profiles
  • B. Loadable Service Module (LSM)
  • C. Aruba image
  • D. Cluster Upgrade Manager

Answer: B

 

NEW QUESTION 65
What can be determined from the command output shown below?

  • A. The synchronized data is protected by VRRP.
  • B. The other Mobility Master (MM) is the active license server.
  • C. The synchronization period is at its default value.
  • D. The command was executed on the standby Mobility Master (MM).

Answer: C

 

NEW QUESTION 66
Refer to the exhibit.

An administrator sets up a cluster of Aruba Mobility Controllers (MCs). What can the administrator determine about the cluster from the command output shown in the exhibit?

  • A. AP load balancing is enabled.
  • B. This is an L2-connected cluster.
  • C. This is an L3-connected cluster.
  • D. User load balancingis enabled.

Answer: A

 

NEW QUESTION 67
An administrator wants to implement a cluster of Aruba Mobility Controllers (MCs). Which guideline should be followed?

  • A. Implement High Availability (HA) AP Fast Failover for redundancy.
  • B. Verify that all the controllers run the same release of software.
  • C. Purchase a cluster license to enable clustering
  • D. Implement Virtual Mobility Controllers and Mobility Controllers in the cluster to provide scalability.

Answer: B

 

NEW QUESTION 68
Refer to the exhibit.

The administrator expects the AP to connect to a cluster, but the AP fails to connect. The administrator examines the configuration of an AP from apboot mode shown in theexhibit. What can the administrator determine about the configuration of the AP?

  • A. The AP is configuredas a RAP to terminate on a Mobility Master.
  • B. The AP is configured as a RAP to terminate on a stand-alone controller.
  • C. The AP is configured to terminate on a non-cluster Mobility Controller.
  • D. The AP is configured to terminate on a Mobility Controller in a cluster.

Answer: D

 

NEW QUESTION 69
Which methods can be used to configure RAP redundancy when connected to two redundant Aruba Mobility Controllers (MCs) in the DMZ? (Select two.)

  • A. IPSec High Availability (HA) between two cluster members.
  • B. Primary and backup LMS IP addresses.
  • C. AirWave direction to RAPs redundant Mobility Controllers.
  • D. Active and Standby AAC.
  • E. Virtual IP address of the two controllers.

Answer: C,D

 

NEW QUESTION 70
A customer uses an SIP application that is not supported by Aruba United Communications and Collaboration (UCC). Which voice deployment mode should the administrator implement on Aruba Mobility Controllers (MCs) to support this application?

  • A. WMM-only mode
  • B. SDN-API mode
  • C. Heuristic mode
  • D. QoS-mode

Answer: A

 

NEW QUESTION 71
Refer to the exhibit.

Which controller connection with the Aruba as the cluster leader?

  • A. Controller D
  • B. Controller B
  • C. Controller A
  • D. Controller C

Answer: B

 

NEW QUESTION 72
An administrator has ArubaOS-Switches that support tunneled node. The administrator wants to tunnel all user traffic from the Ethernet ports on the switches, and have the controllers authenticate the user traffic and apply the appropriate user role.
Which implementation meets these requirements?

  • A. Role-based tunneled node with the controllers configured in a cluster
  • B. Role-based tunneled node with the controllers configured for standalone mode
  • C. Per-port tunneled node with the controllers configured in a cluster
  • D. Per-port tunneled node with the controllers configured for standalone mode

Answer: D

 

NEW QUESTION 73
Refer to the exhibit.

Once connected to a WLAN, a user cannot reliably access resources in a company's network. Based on the output shown in the exhibit, what can be determined about the user's connection?

  • A. The user has successfully authenticated through use of PEAP.
  • B. The user is connected wirelessly to a controller.
  • C. The user is connected to an ArubaOS-Switch.
  • D. The user is connected to a controller through use of the VIA client.

Answer: C

 

NEW QUESTION 74
Refer to the exhibit.

The Branch office RAP shown in the exhibit provides secure wireless employee access. Because of security concerns, the company's security policy does not allow wireless guest access. Some customers that visit the Branch office need Internet access. A RAP's Ethernet Port 3 is used for wired guest access and Port 2 is used for wired employee access. When employees connect to Port 2, they are authenticated successfully and a split-tunnel policy allows them access to both corporate and Internet resources from the Branch office. Guest users, however, cannot access Internet resources on Port 3.
How can the administrator provide guest users Internet access?

  • A. Configure a bridge role for the wired RAP port.
  • B. Implement ClientMatch to handle the employee and guest user traffic correctly.
  • C. Implement the MultiZone feature on the RAP.
  • D. Create a guest VAP that allows wired RAP port access.

Answer: D

 

NEW QUESTION 75
What must the administrator configure on AirWave to monitor and run operational commands on the Aruba Mobility Masters (MMs) and Mobility Controllers (MCs)?

  • A. SNMP and SSH/telnet
  • B. SNMP and HTTPS
  • C. PAPI and SNMP
  • D. PAPI and SSH/telnet

Answer: A

 

NEW QUESTION 76
An administrator creates new pre-and post-authentication roles for a new WLAN. For which profile should the administrator assign these new roles under the Managed Network section?

  • A. AAA profile
  • B. Virtual AP
  • C. 802.1X
  • D. Server Groups

Answer: A

 

NEW QUESTION 77
Refer to the exhibit.

Controllers are configured in a cluster as shown in the exhibit. These are the network details.
* A Mobility Master (MM) manages the cluster.
* The cluster contains two controllers C1 and C2.
* AP1 and AP2 use C1 as their Active AP Anchor Controller (A-AAC), with C2 as their Standby AAC (S-AAC).
* AP3 and AP4 use C2 as their A-AAC, with C1 as their S-AAC.
User1 establishes a wireless connection via AP1, where the Active User Anchor Controller (A-UAC) assigned is C1, with C2 as the standby. What happens when User1 roams the wireless network and eventually their session is handled by AP3?

  • A. The AP3's A-AAC switches to C1, and the user's A-UAC switches to C2.
  • B. The AP3's A-AAC remains on C2, and the user's A-UAC remains on C1.
  • C. The AP3's A-AAC switches to C1, and the user's A-UAC remains on C1.
  • D. The AP3's A-AAC remains on C2, and the user's A-UAC switches to C2.

Answer: B

Explanation:
Explanation

 

NEW QUESTION 78
An administrator mistakenly configures the wrong VLAN setting on a managed controller's interface. This causes the controller to lose management access to the Mobility Master (MM). The administrator knows that the auto roll-back feature will revert the managed controller to a previous configuration that was used prior to the change.
Which command can the administrator use to validate that the rollback process is successful?

  • A. show controller-ip
  • B. show debug
  • C. show config status
  • D. show switches

Answer: D

 

NEW QUESTION 79
Refer to the exhibit.

Two Aruba Mobility Controllers (MC) are managed by a Mobility Master (MM) in a non-cluster deployment as shown in the exhibit.
* The C1 controller is connected to AP1 and AP2.
* The C2controller is connected to AP3 and AP4.
* VLAN mobility is enabled in the VAPs of both AP Groups.
* Both C1 and C2 support the same VLANs.
* User1's wireless device supports BSS Fast Transitioning and is currently connected to AP1.
What happens if User1 roamsacross the network and the user's device associates to AP3?

  • A. User1's traffic is tunneled to the C1 controller, where they will not have to re-authenticate and can keep their original IP address.
  • B. User1's traffic is terminated on the C2 controller, and they will have to re-authenticate and re-obtain a new IP address.
  • C. User1's traffic is terminated on the C2 controller, and they will not have to re-authenticate but will need to obtain a new IP address.
  • D. User1's traffic is terminated on the C2 controller, and they will have to re-authenticate and can keep their original IP address.

Answer: A

 

NEW QUESTION 80
......

HPE6-A71 Exam Questions Get Updated [2022] with Correct Answers: https://www.exam4labs.com/HPE6-A71-practice-torrent.html

Pass HPE6-A71 Exam - Real Questions & Answers: https://drive.google.com/open?id=1kS9GenuRH2w4TJXz8720tsFwfw9JoJ4L