[Feb 29, 2024] Powerful C-S43-2022 PDF Dumps for C-S43-2022 Questions [Q28-Q45]

[Feb 29, 2024] Powerful C-S43-2022 PDF Dumps for C-S43-2022 Questions

Authentic C-S43-2022 Dumps - Free PDF Questions to Pass

NEW QUESTION # 28
What do you need to configure to enable entries in the action log of a piece of equipment?

A. Activate the change documents for the equipment category.
B. Define history related fields in the usage period customizing.
C. Activate the change documents for the equipment reference category.
D. Define the corresponding history related field for the equipment reference category.

Answer: A

Explanation:
Explanation
The action log is a function that allows you to view the changes that were made to fields during the processing of an order or a piece of equipment. The action log shows you the date, time, user, sub-object, field name, old value, and new value of each change. To enable entries in the action log of a piece of equipment, you need to activate the change documents for the equipment category. The equipment category is a classification of equipment that determines the data that can be maintained for the equipment. The change documents are records of the changes that are made to the data of the equipment. You can activate the change documents for the equipment category in the Customizing for Technical Objects under Equipment Define Equipment Categories . You do not need to define history related fields in the usage period customizing, as this is only relevant for the equipment history. The equipment history is a function that allows you to view the usage periods of the equipment, such as the installation, removal, or transfer dates. The history related fields are fields that are relevant for the equipment history, such as the functional location, the maintenance plant, or the cost center. You can define the history related fields in the Customizing for Technical Objects under Equipment Define History-Related Fields for Usage Periods . You do not need to define or activate the change documents for the equipment reference category, as this is only relevant for the equipment reference. The equipment reference is a function that allows you to link a piece of equipment to another object, such as a material, a serial number, or a document. The equipment reference category is a classification of equipment references that determines the data that can be maintained for the equipment reference. You can define the equipment reference category in the Customizing for Technical Objects under Equipment Define Equipment Reference Categories . You can activate the change documents for the equipment reference category in the Customizing for Technical Objects under Equipment Define Change Documents for Equipment Reference Categories . References:
Display of the Action Log, section "Use"
Equipment Categories, section "Change Documents"
History-Related Fields for Usage Periods, section "History-Related Fields" Equipment Reference Categories, section "Change Documents"

NEW QUESTION # 29
In which maintenance object can you use an activity type? Note: There are 2 correct answers to this question.

A. Notification activity
B. Work center
C. Maintenance order header
D. Maintenance order operation

Answer: C,D

Explanation:
Explanation
Maintenance activity type is a key for the type of maintenance activity provided, such as repairs, shutdowns, regular activities, inspections, and so on. It is used to classify data according to the type of maintenance activity in cost evaluations, for example, total costs or number of orders for each technical object1.
Maintenance activity type can be used in the maintenance order header and the maintenance order operation.
In the maintenance order header, it is used to specify the overall type of maintenance activity for the order. In the maintenance order operation, it is used tospecify the type of maintenance activity for each operation within the order. The maintenance activity type in the operation can be different from the one in the header2.
Maintenance activity type cannot be used in the notification activity or the work center. Notification activity is a key for the type of activity performed in response to a notification, such as inspection, repair, or preventive maintenance. It is not related to the maintenance activity type. Work center is a key for the location where an operation is performed, such as a workshop, a laboratory, or a machine. It is also not related to the maintenance activity type.
References: 1: maintenance activity type (PM) (SAP Library - Glossary) 2: maintenance activity type in SAP - Everything you need to know : notification activity (PM) (SAP Library - Glossary) : work center (SAP Library
- Glossary)

NEW QUESTION # 30
You want to display vehicle-specific data for a piece of equipment. How do you proceed?

A. Set the relevant flags in Customizing activity "Define Additional Business Views for Equipment Categories".
B. Assign a view profile to an equipment category for fleet equipment.
C. Assign a view profile to the combination of equipment category and vehicle class.
D. Assign a view profile to the combination of vehicle type and equipment category.

Answer: D

NEW QUESTION # 31
Which functions characterize a Strategic analysis as opposed to embedded analysis within the SAP S/4HANA core system? Note: There are 2 correct answers to this question

A. A collection of tools that are not included with core SAP S/4HANA
B. SAP Business Objects Business Intelligence for Visualization
C. Preconfigured Core Data Service (CDS) containing SQL views
D. SAP Business Objects as a part of SAP Business Warehouse (BW)

Answer: A,B

Explanation:
Explanation
Strategic analysis is a type of analysis that provides a high-level overview of the business performance and trends, as well as the ability to drill down into the details and performroot cause analysis. Strategic analysis is typically performed by business analysts or managers who need to make strategic decisions based on the data.
Strategic analysis requires a collection of tools that are not included with core SAP S/4HANA, such as SAP Analytics Cloud, SAP Business Planning and Consolidation, SAP Business Warehouse, and SAP Business Objects Business Intelligence. These tools enable the integration, transformation, modeling, and visualization of data from various sources, including SAP S/4HANA and other systems. Embedded analysis, on the other hand, is a type of analysis that provides real-time insights into the operational data within the SAP S/4HANA core system. Embedded analysis is typically performed by end users or operational managers who need to monitor and optimize the business processes and transactions. Embedded analysis relies on preconfigured Core Data Services (CDS) views that contain SQL views of the data in SAP S/4HANA. These views can be accessed by SAP Fiori apps, SAP Smart Business KPIs, or SAP Analysis for Microsoft Office. SAP Business Objects is not a part of SAP Business Warehouse, but a separate product that can connect to SAP Business Warehouse or other data sources. Therefore, option C is incorrect. References:
SAP S/4HANA Asset Management - Analytics, section "Strategic Analysis"
SAP S/4HANA Asset Management - Analytics, section "Embedded Analysis"
SAP S/4HANA Asset Management - Analytics, section "SAP BusinessObjects Business Intelligence"

NEW QUESTION # 32
You want to display additional document information within the document flow of a maintenance order.
For which type of document must this be customized?

A. Purchase order
B. Goods movement
C. Invoice
D. Service entry sheet

Answer: D

Explanation:
Explanation
A service entry sheet is a document that records the services performed by a vendor for a maintenance order. It contains information such as the order number, the service description, the quantity, the price, and the acceptance status. To display additional document information within the document flow of a maintenance order, such as the invoice number or the goods receipt number, the document type must be customized. This can be done by using the transaction code OIAE and selecting the document type ML81N for service entry sheets. Then, the additional fields can be added to the document flow by using the Field Selection button1. References: 1: Alibaba Cloud Academy, ACP Cloud Computing Certification Course - Cloud Computing, Lesson 4: Cloud Computing Operations and Management, Topic: Service Entry Sheet.

NEW QUESTION # 33
Where can you see the results of the material availability check for maintenance orders? Note: There are 2 correct answers to this question

A. In the report Material: Where-Used List
B. In the list editing (single-level) for maintenance orders
C. In the material reservation list in inventory management
D. Within a maintenance order

Answer: B,D

Explanation:
Explanation
You can see the results of the material availability check for maintenance orders in two places: within a maintenance order and in the list editing (single-level) for maintenance orders.
Within a maintenance order, you can see the material availability status for each component in the Components tab. The status can be one of the following: Available, Not Available, Partially Available, or Not Checked. You can also see the availability date, which is the date on which the component can be fully available. You can access the maintenance order from the Manage Maintenance Orders app or the Change Maintenance Order app1.
In the list editing (single-level) for maintenance orders, you can see the material availability status for each order in the Material Availability column. The status can be one of the following: Available, Not Available, Partially Available, or Not Checked. You can also see the availability date, which is the date on which all the components for the order can be fullyavailable. You can access the list editing from the List Editing (Single-Level) for Maintenance Orders app2.
References: 1: Checking the Material Availability Status 2: [List Editing (Single-Level) for Maintenance Orders]

NEW QUESTION # 34
Which steps support the maintenance technician in the Report and Repair Malfunction app (3 tiles)? Note: There are 3 correct answers to this question

A. Plan repair work for the responsible work center
B. Complete the malfunction report
C. Find malfunction records already created in a list
D. Assign a production resource tool (PRT) to the operation
E. Verify planned and actual costs

Answer: A,B,C

NEW QUESTION # 35
What are valid item categories for a BOM used in Asset Management? Note: There are 3 correct answers to this question.

A. I (PM Structure element)
B. F (Functional location)
C. D (Document item)
D. E (Equipment)
E. L (Stock item)

Answer: A,C,E

NEW QUESTION # 36
What do you have to consider when implementing Ul technologies in SAP S/4HANA Asset Management?
Note: There are 2 correct answers to this question

A. SAP Fiori Launchpad supports only SAPUIS apps.
B. The cloud version can also use SAP GUI for Windows.
C. SAP GUI for HTML can be used in the SAP Fiori Launchpad.
D. Web Dynpro apps can be used in the SAP Fiori Launchpad.

Answer: C,D

Explanation:
Explanation
When implementing UI technologies in SAP S/4HANA Asset Management, you have to consider the following points:
Web Dynpro apps can be used in the SAP Fiori Launchpad. This is true because Web Dynpro is one of the UI technologies that are supported by the SAP Fiori Launchpad, along with SAP Fiori apps, SAP GUI for HTML, and WebClient UI12.
SAP Fiori Launchpad supports only SAPUI5 apps. This is false because SAP Fiori Launchpad supports not only SAPUI5 apps, but also other UI technologies such as WebDynpro, SAP GUI for HTML, and WebClient UI12.
SAP GUI for HTML can be used in the SAP Fiori Launchpad. This is true because SAP GUI for HTML is one of the UI technologies that are supported by the SAP Fiori Launchpad, along with SAP Fiori apps, Web Dynpro, and WebClient UI12.
The cloud version can also use SAP GUI for Windows. This is false because SAP GUI for Windows is only available for the on-premise version of SAP S/4HANA Asset Management, not for the cloud version31.
References: 3: Explaining the Intelligent Enterprise - SAP Learning 1: UI Technology Guide for SAP S/4HANA 1909 - SAP Online Help 2: SAP S/4HANA UI Technology | SAP Help Portal

NEW QUESTION # 37
What do you have to consider when planning maintenance work that is to be carried out by an external company?

A. For the maintenance order type, you have to assign the Enhanced Procurement Mode.
B. In the control key assigned to the order operation, the "Service" indicator must always be activated.
C. If you assign a control key with indicator "Service" for an external service, you have to enter the actual values via the service entry sheet.
D. If you assign a control key for an external order operation, the actual values must always be entered as a goods receipt in the system.

Answer: A,C

Explanation:
Explanation
When planning maintenance work that is to be carried out by an external company, you have to consider the following aspects:
If you assign a control key with indicator "Service" for an external service, you have to enter the actual values via the service entry sheet. This is because the service entry sheet is used to record the services performed by the external company and to verify the invoice. The service entry sheet is linked to the purchase order and the maintenance order operation.
For the maintenance order type, you have to assign the Enhanced Procurement Mode. This is because the Enhanced Procurement Mode enables you to use lean services and enhanced limits for external services. Lean services are intended for the procurement of small or highly specialized services that are carried out by external suppliers as part of an internal or external operation. They can be maintained in the material master as service products. Enhanced limits allow you to define a maximum amount for the external service without specifying the service specifications in advance.
If you assign a control key for an external order operation, the actual values must always be entered as a goods receipt in the system. This is not true, because the goods receipt is only required for external materials, not for external services. For external services, the service entry sheet is used instead.
In the control key assigned to the order operation, the "Service" indicator must always be activated. This is not true, because the "Service" indicator is only required for external services, not for external operations. For external operations, the "External Processing" indicator must be activated instead. References: External Services Management (MM-SRV) | SAP Help Portal, Highlights for Asset Management in SAP S/4HANA 2021 | SAP Blogs.

NEW QUESTION # 38
What are the prerequisites for serializing a piece of equipment? Note: There are 3 correct answers to this question

A. Assign a serial number profile to the equipment category
B. Assign a serial number profile to the related material master.
C. Maintain a serial number for an existing equipment master.
D. Add a serialized material to the equipment serial data view.
E. Assign a serial number profile to an additional business view for equipment category

Answer: A,B,C

Explanation:
Explanation
Serializing a piece of equipment means assigning a unique serial number to identify and track the equipment throughout its lifecycle. The prerequisites for serializing a piece of equipment are:
Assign a serial number profile to the equipment category. This defines the rules for creating and managing serial numbers for the equipment, such as the number range, the check digit, and the serial number usage. The serial number profile is assigned in the Customizing activity Define Equipment Categories under Plant Maintenance and Customer Service -> Master Data in Plant Maintenance and Customer Service -> Technical Objects -> Equipment -> Equipment Categories.
Assign a serial number profile to the related material master. This ensures that the material and the equipment have the same serial number profile and that the serial number is automatically copied from the material to the equipment. The serial number profile is assigned in the material master data in the Plant Data/Stor. 1 view under Serial Number Profile.
Maintain a serial number for an existing equipment master. This can be done either manually or automatically. Manually, you can enter the serial number in the equipment master data in the Serial Data view under Serial Number. Automatically, you can link the equipment with a serialized material and the serial number will be copied from the material to the equipment. This linking can be done either with a goods movement or manually.
The options that are not prerequisites for serializing a piece of equipment are:
Add a serialized material to the equipment serial data view. This is not a prerequisite, but rather a possible way to link the equipment with a serialized material and copy the serial number from the material to the equipment. However, this can only be done if the serial number profile is already assigned to both the equipment category and the material master.
Assign a serial number profile to an additional business view for equipment category. This is not a valid option, as the serial number profile is assigned to the equipment category itself, not to any additional business view.
References:
Serial Number Management
Explaining Refurbishment of Spare Parts

NEW QUESTION # 39
Which default object type do you use to settle a refurbishment order?

A. The fixed asset
B. The material
C. The cost center
D. The WBS element

Answer: B

NEW QUESTION # 40
What is characteristic for a maintenance order with status REL- if you also consider the capabilities of business functions? Note: There are 3 correct answers to this question.

A. Goods receipts for external services can be entered.
B. The planner can change estimated costs only at the header level
C. The planner can change planned costs at the operation level
D. The controller can determine actual cost surcharges.
E. The assignment of the notification to the maintenance order header cannot be deleted.

Answer: A,D,E

Explanation:
A maintenance order with status REL means that the order is released and ready for execution. At this stage, the following characteristics apply:
A: Goods receipts for external services can be entered. This is true because external services are procured through purchase orders that are linked to the maintenance order. The service performer can post service entry sheets to record the executed work and consumable materials. These service entry sheets can be approved and posted as goods receipts for external services1.
B: The planner can change planned costs at the operation level. This is false because once the order is released, the planned costs are frozen and cannot be changed by the planner. The planner can only change the estimated costs at the header level2.
C: The planner can change estimated costs only at the header level. This is true, but it is not a characteristic of a released order. The planner can change the estimated costs at any time, even before the order is released2.
D: The controller can determine actual cost surcharges. This is true because the controller can use the business function LOG_EAM_CI_7 to calculate and post actual cost surcharges for maintenance orders. This function can be used for orders with status REL or TECO3.
E: The assignment of the notification to the maintenance order header cannot be deleted. This is true because the notification is the source document for the maintenance order and provides the reason for the order. The notification can only be deleted if the order is deleted or set to status CRTD. References: 1: Lean and Limit Value Services in Maintenance Order 2: Maintenance Order Cost Analysis 3: Actual Cost Surcharges for Maintenance Orders : Notification Assignment to Maintenance Order

NEW QUESTION # 41
How does a maintenance request within the phase-based process differ from a maintenance notification in the standard process?

A. It is a new business object with no connection to a maintenance notification.
B. It contains an additional screening phase where requests can be accepted or rejected.
C. It always uses the risk-based assessment for prioritization.
D. It is mandatory to assign a task list to the maintenance request.

Answer: B

NEW QUESTION # 42
You want to set up a general maintenance task list for inspection rounds using the overall time confirmation as a simplified way to record measurement documents. What do you need to do? Note: There are 2 correct answers to this question

A. Assign a measuring point as a production resources/tools (PRT) to a task list operation.
B. Assign a piece of equipment with an allocated measuring point to a task list operation
C. Assign an inspection lot to the task list header
D. Assign an inspection document as a PRT to the task list operation.

Answer: A,B

Explanation:
Explanation
To set up a general maintenance task list for inspection rounds using the overall time confirmation as a simplified way to record measurement documents, you need to do the following steps:
Assign a piece of equipment with an allocated measuring point to a task list operation. This will allow you to inspect the equipment and record the measurement readings for the measuring point during the inspection round. You can assign the equipment either manually or automatically using the object list in the task list header1.
Assign a measuring point as a production resources/tools (PRT) to a task list operation. This will allow you to inspect the measuring point and record the measurement readings for it during the inspection round. You can assign the measuring point either manually or automatically using the PRT category
0010 (Measuring Point) in the task list operation1.
You do not need to assign an inspection lot to the task list header, as this is not required for inspection rounds. Inspection lots are used for quality inspections that are triggered by events such as goods receipt, production order, or sales order2.
You do not need to assign an inspection document as a PRT to the task list operation, as this is not supported for inspection rounds. Inspection documents are used for quality inspections that are based on inspection plans and inspection characteristics2. References: PM - General maintenance task list and Set up your SAP S/4HANA system for EAM Inspection Checklists in SAP Help Portal.

NEW QUESTION # 43
What happens if you change the primary key of a functional location?

A. The user must decide whether the functional location is assigned to a new superior functional location.
B. The functional location cannot be assigned to a new superior functional location when the new label is entered.
C. The user must define a new labelling system for the new primary key.
D. Changing the superior functional location via alternative labeling is not possible.

Answer: A

Explanation:
Explanation
Changing the primary key of a functional location means changing the label of the functional location. The label is the unique identifier of the functional location and it consists of a structure indicator and a functional location identification. The structure indicator defines the allowed characters and the hierarchy levels of the functional location structure. The functional location identification is the actual name of the functional location. When you change the primary key of a functional location, you can either change the structure indicator or the functional location identification, or both. If you change the structure indicator, you need to adjust the functional location identification accordingly. If you change the functional location identification, you need to decide whether the functional location is assigned to a new superior functional location or not. A superior functional location is the functional location that is directly above the current functional location in the hierarchy. For example, if you have a functional location FL-01-02-03, where FL is the structure indicator,
01 is the first level, 02 is the second level, and 03 is the third level, you can change the primary key to FL-01-02-04, which means changing the functional location identification within the same level. In this case, you need to decide whether the functional location is still assigned to FL-01-02 as the superior functional location or not. Alternatively, you canchange the primary key to FL-01-03, which means changing the functional location identification to a different level. In this case, you need to decide whether the functional location is still assigned to FL-01 as the superior functional location or not.
The user does not need to define a new labelling system for the new primary key, as the labelling system is defined by the structure indicator, which can be reused for different functional locations. Therefore, answer A is incorrect. The functional location can be assigned to a new superior functional location when the new label is entered, as long as the new label is consistent with the structure indicator and the hierarchy rules. Therefore, answer B is also incorrect. Changing the superior functional location via alternative labeling is possible, as alternative labeling allows you to assign different labels to the same functional location. Therefore, answer C is also incorrect. References: Explaining Technical Asset Structures - SAP Learning, Organizational Elements and Structures | SAP Help Portal, and SAP Alternative Labeling of Functional Locations.

NEW QUESTION # 44
Which functions characterize a Strategic analysis as opposed to embedded analysis within the SAP S/4HANA core system? Note: There are 2 correct answers to this question