[Dec 21, 2025] D-PST-DY-23 Exam Dumps PDF Guaranteed Success with Accurate & Updated Questions
Pass D-PST-DY-23 Exam - Real Test Engine PDF with 220 Questions
NEW QUESTION # 22
What is the primary benefit of configuring remote replication for file storage resources in PowerStore?
- A. Simplifying authentication processes
- B. Reducing storage capacity requirements
- C. Ensuring data availability in case of site failures
- D. Accelerating network performance
Answer: C
NEW QUESTION # 23
What mechanism does PowerStore use to apply and manage licenses?
- A. PowerStore License Manager
- B. SNMP traps
- C. QR codes
- D. USB drives
Answer: A
NEW QUESTION # 24
Which network does the PowerStore Discovery Utility use to identify unconfigured appliances?
- A. Internal
- B. Management
- C. ICM
- D. IDN
Answer: B
Explanation:
PowerStore Discovery Utility and Network Usage
The PowerStore Discovery Utility is a tool used to find and initially configure unconfigured PowerStore appliances on the network. It uses the Management Network to perform this discovery.
Here's how it works:
mDNS (Multicast DNS): The utility relies on mDNS, a protocol that allows devices to discover each other on a local network without a pre-configured DNS server. This is essential for finding new PowerStore appliances that haven't been set up yet.
Management Network: The Management Network in PowerStore is dedicated to out-of-band management.
It's the network used for:
Initial appliance discovery
Accessing the PowerStore Manager interface
Performing management tasks
Port 5353: Both TCP and UDP port 5353 must be open on the Management Network for mDNS to function correctly and allow the discovery utility to find the unconfigured appliances.
Why other options are incorrect:
A). IDN: IDN (Internal Dell Network) is not a standard term related to PowerStore discovery.
C). ICM: ICM (Internet Control Message Protocol) is a network protocol used for error reporting and diagnostics, not for device discovery.
D). Internal: While the term "Internal" might seem relevant, it's not specific enough. The Management Network is the precise network used for this purpose. Dell PowerStore Reference PowerStore: Discover and Configure a PowerStore Appliance: This document in the PowerStore documentation explains the process of using the Discovery Utility and mentions that it requires network access to the appliance's management IP address, which is on the Management Network.
NEW QUESTION # 25
SIMULATION
A PowerStore user has a business need for file system snapshots of NAS Server NAS1 with the following attributes:
Using the PowerStore Simulator, make the appropriate configuration change.
When you have finished, continue to the next question.
Answer:
Explanation:
see the Explanation for the solution
Explanation:
1. Launch the PowerStore Simulator and log in with the admin credentials.
2. On the left navigation pane, click Protection and then click Protection Policies.
3. Click Create Policy and enter a name and description for the policy, such as NAS1 Snapshot Policy.
4. Under Snapshot Rules, click Add Rule and configure the following settings:
5. Name: Enter a name for the rule, such as NAS1 Snapshot Rule.
6. Schedule: Select Custom and enter the following cron expression: 0 */2 * * 1-5. This expression means that the snapshots will be taken every 2 hours on Monday to Friday
7. Retention: Select Until and enter 2 days. This means that the snapshots will be deleted after 2 days.
8. Access Type: Select Snapshot. This means that the snapshots will be accessible through the Previous
9. Click Save to create the snapshot rule and then click Next.
10. Under Replication Rules, click Skip. This means that no replication rule will be added to the policy.
11. Click Next and then click Finish to create the protection policy.
12. On the left navigation pane, click Storage and then click File Systems.
13. Select the file system that belongs to NAS Server NAS1 and click More Actions.
14. Click Edit and then click Protection Policy.
15. Select the protection policy that was created in the previous steps, such as NAS1 Snapshot Policy, and click Save.
16. Click Confirm to apply the protection policy to the file system.
NEW QUESTION # 26
Which two statements are true of PowerStore File Migration import? (Choose two.)
- A. PS arrays are supported with PowerPath.
- B. VNX2 arrays are supported with VDM.
- C. The source file system can be a replica.
- D. Snapshots and snapshot schedules are migrated
- E. Both SMB and NFS are supported, but cannot be mixed.
Answer: B,E
NEW QUESTION # 27
What is the maximum number of snapshot and replication rules that a protection policy supports?
- A. Up to four replication rules, and no more than one snapshot rule.
- B. Up to four snapshot rules, and no more than one replication rule.
- C. Up to four rules, protection types cannot be mixed in the same policy.
Answer: B
NEW QUESTION # 28
What is the minimum-security level needed to create a PowerStore account with the ability to block user accounts?
- A. Security Administrator
- B. VMware Administrator
- C. Storage Administrator
- D. Operator
Answer: A
NEW QUESTION # 29
Place the steps in the correct order to map a PowerStore volume to a NVMe host.
Answer:
Explanation:
1 - add NVMe over TCP Sofware Adapter
2 - Add Host
3 - Add Controller
4 - Add NVMe volume
NEW QUESTION # 30
What does the data import session Pause operation do?
- A. Stops the source to PowerStore background copy operation
- B. Deactivates the host to PowerStore control path
- C. Stops the source to PowerStore cutover operation
- D. Deactivates the host to PowerStore data path
Answer: A
NEW QUESTION # 31
What is the maximum number of supported replication and snapshot rules in a protection policy?
- A. One snapshot rule and four replication rules
- B. Four snapshot rules and four replication rules
- C. Four snapshot rules and one replication rule
- D. One snapshot rule and one replication rule
Answer: C
NEW QUESTION # 32
Which three file replication operations are available in PowerStore Manager? (Select 3)
- A. Reprotect and Reverse
- B. Reprotect
- C. Resynchronize
- D. Reverse
- E. Planned Failover
Answer: B,C,D
NEW QUESTION # 33
Refer to the exhibit.
Use the simulator to assign a protection policy to the virtual machine "VM1".
Use the following settings:
- Snapshots on Monday through Friday at 10:00 PM Eastern Time
- Retention of 10 days
When you have finished, continue to the next question.
Answer:
Explanation:
See the Explanation below for complete solution.
Navigate to the virtual machine management section where VMs are listed, usually under the "Compute" or "VM" section.
Locate "VM1" from the list of virtual machines.
Access the settings or properties of "VM1".
Look for the "Protection" or "Protection Policies" section within the VM settings.
Select the option to create a new policy or assign an existing one.
In the policy settings, configure the snapshot schedule:
Set the frequency to weekly on Monday, Tuesday, Wednesday, Thursday, and Friday.
Set the time to 10:00 PM Eastern Time.
Configure the retention period for the snapshots to be 10 days.
Save the policy and ensure it is correctly associated with "VM1".
Reference: https://infohub.delltechnologies.com/en-US/l/dell-powerstore-manager-overview-1/protection-protection-policies-2/
NEW QUESTION # 34
DRAG DROP Place the steps in order for configuring source and destination vCenters when setting up a vVol replication with SRM.
Answer:
Explanation:
NEW QUESTION # 35
Which data protection parameter defines how often data is backed up in PowerStore?
- A. Recovery Time Objective (RTO)
- B. Data Retention Period (DRP)
- C. Backup Frequency Interval (BFI)
- D. Recovery Point Objective (RPO)
Answer: D
NEW QUESTION # 36
What describes the Import External Storage feature?
- A. A native network configuration feature of PowerStore that configures external Ethernet switching for PowerStore installation
- B. An external plugin feature for hosts to tune application workload IO on PowerStore NVMe based storage
- C. A feature external to PowerStore that orchestrates vMotion movement of virtual machines onto PowerStore X systems
- D. A native data migration feature of PowerStore that imports external block storage to PowerStore
Answer: D
NEW QUESTION # 37
......
Get New D-PST-DY-23 Certification Practice Test Questions Exam Dumps: https://www.exam4labs.com/D-PST-DY-23-practice-torrent.html
Real D-PST-DY-23 Exam Dumps Questions Valid D-PST-DY-23 Dumps PDF: https://drive.google.com/open?id=18aOBlHKk68ZalTmF5CCQWbPlqIQl6QOY