[Dec 14, 2021] Get New 5V0-42.21 Practice Test Questions Answers
5V0-42.21 Dumps and Exam Test Engine
NEW QUESTION 20
Which statement describes a characteristic of VMware SU-WAN Edge (VCL) clustering?
- A. A VCE cluster requires one dedicated interface for HA sync
- B. VCF clusters member sync flow tables between themselves.
- C. VCE cluster members should have unique IP addresses on its WAN interfaces
- D. One VCE cluster can be formed with both virtual and hardware at the same lime
Answer: B
NEW QUESTION 21
What Is a typical use case for the deployment of a VMware SU-WAN Partner Gateway?
- A. Provide mite transport m a service provider backbone tor interconnecting a global customer SD-WAN branches.
- B. Interconnect branches/remote sites of a single enterprise customer to the internet
- C. Provide connectivity between multiple enterprise customers over private circuits
- D. Get improved flow analytics for all traffic in the SD-WAN network
Answer: A
NEW QUESTION 22
A customer is migrating a branch site with a VMware SD-WAN Edge coexisting with the CE. The Edge will be connected to internet link directly while connecting to the CE via a Layer 3 LAN switch.
MPLS underlay is the preferred path for communication from this site to branch sites that have no VMware SD-WAN Edges. Communication from this site to branch sites that have VMware SD-WAN Edges should go through overlay.
- A. Use BGP as the rout.ng protocol on UK Edge and flag its BGP neighbor to the Layer 3 LAN switch as Uplink.
- B. Use BGP as the routine, protocol on the Edge and flag its BGP neighbor to GE as Uplink.
- C. Use BGP as the routing protocol on the Edge and flag its HGP neighbor to PE as Uplink.
- D. Use BGP as the routing protocol on the Edge and filter prefixes from CE using Uplink Community
Answer: C
NEW QUESTION 23
Which statement is correct about VMware SD-WAN Orchestrator user roles and their associate privileges?
- A. Customer Support User can view and manage then company's network
- B. Superuser: User can view but cannot create additional admin.
- C. Standard Admin User can view but cannot manage their customer.
- D. Enterprise read only: User can view but not modify configurations.
Answer: A
NEW QUESTION 24
Refer to the exhibit.
Which VMware SD-WAN Edge High Availability deployment is being used"?
- A. VRRP HA
- B. Standard HA
- C. Enhanced HA
- D. Fault Domain HA
Answer: A
NEW QUESTION 25
Company A has recently acquired Company B and needs to establish network connectivity. Company A has only Cisco for firewalls and VPN. Company B is using VMware SD-WAN.
Which VMware SD-WAN Cloud VPN solution should an administrator configure to establish connectivity?
- A. Branch to Main Office VPN
- B. Branch to Branch VPN
- C. Branch to Non VMware SD-WAN Site.
- D. Branch to SD-WAN Hub
Answer: C
NEW QUESTION 26
Due to very strict security policies an enterprise customer is looking for an on-premises deployment of the VMware SD-WAN Orchestrator and Controllers. Customer data is not expected to flow through this Controller, however it is desirable that management plane traffic towards the Orchestrator coming from VMware SD-WAN Edges can take the overlay tunnels through this controls.
What are some of the needed steps to achieve the requirements above?
- A. Under gateway configuration -> Configure the Gateway roles as Control Plane, disable Data Plane and enable management plane forward
- B. Under gateway configuration -> Configure the Gateway roles as Control-Plane, enable Data Plant- and Partner Gateway role and add a static default route with NAT hand off settings under Partner Gateway advanced hand oft settings
- C. Under gateway configuration -> Configure the Gateway roles as Control Plane, disable Data Plane and add static host routes with NAT hand off settings porting to the Orchestrator IPs under Partner Gateway advanced hand off settings
- D. Under gateway configuration -> Configure the Gateway roles as Control-Plane, enable Data Plane and Partner Gateway role and add static host mules with NAT hand off settings pointing to the Orchestrator IPs under Partner Gateway advanced hand off settings
Answer: D
NEW QUESTION 27
Which VMware SD-WAN component Is responsible for overlay route distribution?
- A. VMware SD-WAN Hub
- B. VMware SD-WAN Orchestrator
- C. VMware SD-WAN Controller
- D. VMware SD-WAN Edge
Answer: C
NEW QUESTION 28
The VMware SD-WAN solution is comprised of Orchestrator, Gateway, and Edge. The architecture ensures separation and secure communication between the management, control, and data plane of the solution.
The management plane consists of the VMware SD-WAN Orchestrator, and the control plane is comprised of the VMware SO-WAN Gateway/ Controller. Which statement correctly describes this situation?
- A. Traffic between VMware SD-WAN Edges and from VMware SD-WAN Edges to VMware SD-WAN Gateways uses VMware SD-WAN Management Protocol (VCMP) tunneling over User Datagram Protocol (UDP) port 2427. secured with Internet Protocol Security (IPSec)
- B. There is impact on data plane when the Edge loses connectivity to the management plane.
Theoperatoronly loses the visibility of the Edge from Orchestrator and cannot make configuration changes on the Edge until the management plane connectivity is resumed. - C. To make the entire solution to work property, TCP port 443 and HOP port 500 and UDP port 4500 are required to open in the firewallrule, if Edge is deployed behind a Firewall.
- D. VMware SD-WAN Edges/Gateways establishes a Transport Layer Security (TLS) 1 2 encrypted session to the VMware SU-WAN Orchestrator
Answer: A
NEW QUESTION 29
Which port is used for the high availability connection between the two Edges on a pair of Edge 510s?
- A. Any port may be chosen.
- B. SFP1
- C. GE1
- D. GE4
Answer: B
NEW QUESTION 30
During a VMware SD-WAN design session for a core business application, a customer expressed the following requirements:
* Allow business abstraction so that similar policies can be applied across different hardware types.
* Eliminate the need for the operations team to know the type of physical connectivity or the WAN carrier.
* Maintain SLA for real-time application.
Which design should be taken in terms of Link Steering?
- A. Select Error Correct Before Steering with % definition
- B. Deselect Error Correct before Steering Defaults.
- C. Select WAN Link, and then define the DSCP tagging
- D. Select Transport Group, and then select Preferred option.
Answer: C
NEW QUESTION 31
A customer is using VMware SD-WAN and has branches in different continents where the Edges are assigned with local Gateways.
Which Gateway should be used so all the branches can build tunnels with one another?
- A. Primary Gateway
- B. Regional Gateway
- C. Super Gateway
- D. Alternate Gateway
Answer: A
NEW QUESTION 32
A service provider wants to offer a common service from its data center via VMware SD-WAN Partner Gateway to many customers with overlapping IP addresses.
Which configuration must be implemented?
- A. Define multiple segments tor each customer
- B. Enable NAT hand off under hand off static routes configuration
- C. Enable tag type QinQ under hand off interface configuration
- D. Configure source policy-based NAT under business- policies configuration
Answer: A
NEW QUESTION 33
Employees with an Apple iOS device have been causing congestion on the company's internet What should an administrator configure to target these devices when creating a Business policy for this issue?
- A. Match Destination
- B. Match Source
- C. Action Network Service
- D. Action Priority
Answer: D
NEW QUESTION 34
A service provider needs to ensure that the NOC is notified proactively in the event that an Edge interface loses connectivity to its WAN provider.
Which three methods are available for generating these alerts? (Choose three.)
- A. Webhook
- B. Dyinq Gasp
- C. Slack notification
- D. Push notification via the VMware SD WAN mobile app
- E. Text/SMS
- F. SNMP Trap
Answer: B,D,E
NEW QUESTION 35
Refer to the exhibit.
An MSP is designing a solution for a merger of Customer A and Customer B to Customer A's enterprise. Due to overlapping IP addresses and security requirements, the segments with the same names between Customer A and Customer A cannot be merged.
Based on the graphic and the requirements, how many new segments need to be configured in the VMware SD-WAN Orchestrator?
- A. 6 segments
- B. 4 segments
- C. 2 segments
- D. 5 segments
Answer: D
NEW QUESTION 36
......
2021 New Exam4Labs 5V0-42.21 PDF Recently Updated Questions: https://www.exam4labs.com/5V0-42.21-practice-torrent.html