Cisco 300-430 Test Engine Dumps Training With 143 Questions
300-430 Questions Pass on Your First Attempt Dumps for CCNP Enterprise Certified
For more info read reference:
How to study the Cisco 300-430: Implementing Cisco Enterprise Wireless Networks Exam
For the Cisco 300-430: Implementing Cisco Enterprise Wireless Networks Exam, Cisco offers several options on their website. Cisco provides classroom training through which Cisco’s authorized learning partners teach instructor-led classes all over the world. E-Learning solutions are provided by Cisco for exam preparation via self-paced online courses. Students are highly encouraged to join Cisco’s Certification community where they can join students from all over the world and learn together. After taking all the official training courses, 300-430 practice exams are a must to get a proper understanding of exam format and question types. For further exam self-study materials, refer to the links down below:
We recommend a combination of hands-on experience, completion of the training course, and self-study in the areas described in the Exam Outline section of this exam guide as preparation for this exam.
NEW QUESTION 59
All APs are receiving multicast traffic, instead of only the APs that need it. What is the cause of this problem?
- A. The wrong multicast address was used
- B. The multicast group includes all APs
- C. The multicast group is assigned the wrong VLAN
- D. Multicast IGMP snooping is not enabled
Answer: D
NEW QUESTION 60
An engineer is performing a Cisco Hyperlocation accuracy test and executes the cmxloc start command on Cisco CMX. Which two parameters are relevant? (Choose two.)
- A. AP name
- B. X, Y real location
- C. client MAC address
- D. client description
- E. WLC IP address
Answer: B,C
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/88/b_ap_4800_hyperlocation_deployment_g
NEW QUESTION 61
An engineer configured a Cisco AireOS controller with two TACACS+ servers. The engineer notices that when the primary TACACS+ server fails, the WLC starts using the secondary server as expected, but the WLC does not use the primary server again until the secondary server fails or the controller is rebooted. Which cause of this issue is true?
- A. DNS query is disabled
- B. DNS query is enabled
- C. Fallback is disabled
- D. Fallback is enabled
Answer: C
Explanation:
NEW QUESTION 62
A wireless network has been implemented to enable multicast video to be streamed reliably over the wireless link to the wireless to the wireless users. After a client reports that the video is unable to stream the administrator determines that the client is connecting a data rate of 12 Mbps and is trying to stream to a void multicast address on the network. Which two actions must be applied? (Choose two.)
- A. Turn off IGMP snooping for all the configured WLANs on the controller.
- B. Change the WLAN QoS value to Bronze for the WLAN that multicast will be enabled.
- C. Allow multicast-direct to work correctly and multicast-direct to be enabled globally.
- D. Allow RTSP to stream the video due to wireless multicast not using acknowledgements.
- E. Implement video-stream for the multicast video on the controller.
Answer: C,E
NEW QUESTION 63
A new MSE with wIPS service has been installed and no alarm information appears to be reaching the MSE from controllers. Which protocol must be allowed to reach the MSE from the controllers?
- A. CAPWAP
- B. SNMP
- C. SOAP/XML
- D. NMSP
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter
NEW QUESTION 64
Refer to the exhibit.
An engineer must restrict some subnets to have access to the WLC. When the CPU ACL function is enabled. No ACLs in the drop-down list are seen. What is the cause of the problem?
- A. When the ACL is created, it must be specified that it is a CPU ACL.
- B. The ACL does not have a rule that is specified to the Management interface.
- C. This configuration must be performed through the CLI and not though the web GUI
- D. No ACLs have been created under the Access Control List tab.
Answer: B
NEW QUESTION 65
Where is a Cisco OEAP enabled on a Cisco Catalyst 9800 Series Wireless Controller?
- A. Flex Profile
- B. Policy Profile
- C. AP Join Profile
- D. RF Profile
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/configguide/b_wl_16_10_cg/flexconnect.html
NEW QUESTION 66
An engineer must configure a Cisco WLC to support Cisco Aironet 600 Series OfficeExtend APs. Which two Layer 2 security options are supported in this environment? (Choose two.)
- A. Static WEP + 802.1X
- B. WPA+WPA2
- C. Static WEP
- D. CKIP
- E. 802.1X
Answer: B,C
NEW QUESTION 67
A customer is deploying local web authentication. Which software application must be implemented on Cisco ISE to utilize as a directory service?
- A. Novell eDirectory
- B. SAML
- C. Solaris Directory Service
- D. LDAP
Answer: D
Explanation:
NEW QUESTION 68
A customer is deploying local web authentication. Which software application must be implemented on Cisco ISE to utilize as a directory service?
- A. Novell eDirectory
- B. SAML
- C. Solaris Directory Service
- D. LDAP
Answer: D
Explanation:
NEW QUESTION 69
Which three properties are used for client profiling of wireless clients? (Choose three.)
- A. MAC OUI
- B. DHCP
- C. HTTP user agent
- D. hostname
- E. IP address
- F. OS version
Answer: A,B,C
NEW QUESTION 70
A corporation is spread across different countries and uses MPLS to connect the offices. The senior management wants to utilize the wireless network for all the employees. To ensure strong connectivity and minimize delays, an engineer needs to control the amount of traffic that is traversing between the APs and the central WLC. Which configuration should be used to accomplish this goal?
- A. FlexConnect mode with OfficeExtend enabled
- B. FlexConned mode with central switching enabled
- C. FlexConnect mode with local authentication
- D. FlexConnect mode with central authentication
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/72/configuration/guide/cg/cg_flexconnect.html#wp12
NEW QUESTION 71
Which two restrictions are in place with regards to configuring mDNS? (Choose two.)
- A. mDNS is not supported over IPv6.
- B. mDNS is not supported on FlexConnect APs with a locally switched WLAN.
- C. mDNS uses only UDP port 5436 as a destination port.
- D. mDNS cannot use UDP port 5353 as the destination port.
- E. Controller software must be newer than 7.0.6+.
Answer: A,B
Explanation:
NEW QUESTION 72
A company is collecting the requirements for an on-premises event. During the event, a wireless client connected to a dedicated WLAN will run a video application that will need to average 300000000 bits per second to function properly. What is the QoS marketing that needs to be applied to that WLAN?
- A. Gold
- B. Bronze
- C. Platinum
- D. Silver
Answer: A
NEW QUESTION 73
An engineer configures a Cisco Aironet 600 Series OfficeExtend AP for a user who works remotely. What is configured on the Cisco WLC to allow the user to print a printer on his home network?
- A. SE-connect
- B. AP failover priority
- C. FlexConnect
- D. split tunneling
Answer: D
Explanation:
NEW QUESTION 74
An engineer is deploying centralized wireless solution with a 5508 controller. What is the most AP licenses that can be supported?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
Explanation:
You can order Cisco 5500 Series Controllers with support for 12, 25, 50, 100, 250 or 500 APs as the controller's base capacity. You can add additional AP capacity through capacity adder licenses available at 25,
50, 100 and 250 AP capacities. You can add the capacity adder licenses to any base license in any combination to arrive at the maximum capacity of 500 APs.
Reference: http://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/112926-5508- wlc-license.html
NEW QUESTION 75
Branch wireless users report that they can no longer access services from head office but can access services locally at the site. New wireless users can associate to the wireless while the WAN is down. Which three elements (Cisco FlexConnect state, operation mode, and authentication method) are seen in this scenario? (Choose three.)
- A. authentication-local/switch-local
- B. standalone mode
- C. WPA2 personal
- D. WEB authentication
- E. lightweight mode
- F. authentication-central/switch-central
Answer: A,B,C
NEW QUESTION 76
A wireless engineer needs to implement client tracking. Which method does the angle of arrival use to determine the location of a wireless device?
- A. received signal strength
- B. time distance of arrival
- C. angle of incidence
- D. triangulation
Answer: C
Explanation:
NEW QUESTION 77
An engineer needs to provision certificates on a Cisco Catalyst 9800 Series Wireless Controller. The customer uses a third-party CA server. Which protocol must be used between the controller and CA server to request and install certificates?
- A. TLS
- B. SSL
- C. LDAP
- D. SCEP
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/config-guide/b_wl_16_10_cg/locally-signific
NEW QUESTION 78
Which component must be integrated with Cisco DNA Center to display the location of a client that is experiencing connectivity issues?
- A. Cisco Mobility Services Engine
- B. Cisco Connected Mobile Experiences
- C. Cisco Hyperlocation Module
- D. Wireless Intrusion Prevention System
Answer: C
Explanation:
NEW QUESTION 79
A network engineer needs to configure multicast in the network. The implementation will use multiple multicast groups and PIM routers. Which address provides automatic discovery of the best RP for each multicast group?
- A. 224.0.0.14
- B. 224.0.0.13
- C. 224.0.1.40
- D. 224.0.1.39
Answer: C,D
NEW QUESTION 80
Refer to the exhibit.
An engineer needs to manage non-802.11 interference. What is observed in the output on PI?
- A. The three Individual clusters shown Indicate poor AP placement.
- B. Several light interferers are collectively impacting connectivity at this site.
- C. At least one strong interferer is impacting connectivity at this site.
Answer: A
NEW QUESTION 81
Which two protocols are used to communicate between the Cisco MSE and the Cisco Prime Infrastructure network management software? (Choose two.)
- A. SSH
- B. HTTPS
- C. SOAP
- D. NMSP
- E. Telnet
Answer: B,D
Explanation:
https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/33/user/guide/bk_CiscoPrimeInfrastructure_3_3_0_UserGuide/bk_CiscoPrimeInfrastructure_3_3_0_UserGuide_chapter_0100110.html
NEW QUESTION 82
A Cisco WLC has been added to the network and Cisco ISE as a network device, but authentication is failing.
Which configuration within the network device configuration should be verified?
- A. device interface credentials
- B. device ID
- C. shared secret
- D. SNMP RO community
Answer: C
Explanation:
NEW QUESTION 83
Where is Cisco Hyperlocation enabled on a Cisco Catalyst 9800 Series Wireless Controller web interface?
- A. Policy Profile
- B. Flex Profile
- C. AP Join Profile
- D. RF Profile
Answer: C
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/config-guide/b_wl_16_10_cg/cisco- hyperlocation.html
NEW QUESTION 84
......
Cisco 300-430: Implementing Cisco Enterprise Wireless Networks Certification Path
Cisco 300-430: Implementing Cisco Enterprise Wireless Networks exam is affiliated with the CCNP Service Provider and Cisco Accredited Professional-Service Provider wireless networks Implementation certifications. This is the official prerequisite for this exam. However, the course, cisco enterprise wireless networks, allows applicants to prepare for this exam and is highly recommended. 300-430 dumps is the best start towards the preparation of the exam.
Hover on to Cisco’s Website and complete the official training course provided for the exam. Check for the topics mentioned in the exam Outline section of this guide to review the online documentation, tip sheets, and user guides and study the details relevant to those topics. Refer to the links at the end of this document for more study material.
300-430 Practice Test Pdf Exam Material: https://www.exam4labs.com/300-430-practice-torrent.html
300-430 Answers 300-430 Free Demo Are Based On The Real Exam: https://drive.google.com/open?id=1KOgmFHhR4FDCvLX61KpZMzRSijW0PpIA