Authentic 5V0-41.20 Dumps - Free PDF Questions to Pass
Guaranteed Accomplishment with Newest Nov-2021 FREE 5V0-41.20
For more info, read the reference:
5V0-41.20 VMware vSAN 6.7 Specialist Exam 2019 VMware Learning Zone VCP Community VMware vSAN: Deploy and Manage [V6.7] VMware vSAN: Production Operations [V6.7]
NEW QUESTION 14
Scenario 2:
After completing the branch activation activities for ail required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and blanches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
After deploying the Edge, the security team has determined that traffic from Guest wireless traffic is able to reach resources in the Production network. There should be absolutely no interaction.
How can this be prevented?
- A. Create two subnets, one for Guest wireless traffic and another one for Production traffic.
- B. Create an additional segment for Guest wireless traffic and leave the Production traffic in the default global segment.
- C. Segmentation is currently not supported on VeloCloud Edge.
- D. Have Guest wireless and Production traffic in the same segment but different VLANs.
Answer: C
NEW QUESTION 15
Scenario 2:
After completing the branch activation for all required branches, the network administrator attempts to test connectivity between the various branches and between hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the some applications they are accessing.
Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
A technician has added Edges to an East Coast Profile. These Edges are not able to communicate via dynamic tunnels to Edges in the West_Coast profile. The technician has noticed that some Edges are able to establish dynamic tunnels.
What could be preventing Edges from being able to establish dynamic tunnels?
- A. Neither profile has been configured to utilize cloud gateways.
- B. The profiles are configured to only allow dynamic branch to branch for Edges within the same profile.
- C. The profiles are not configured to allow dynamic branch to branch VPNs.
- D. None of the existing profiles have Cloud VPN enabled thus preventing dynamic tunnels.
Answer: C
NEW QUESTION 16
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
One branch location is not able to communicate with another branch location via dynamic branch-to-branch tunnels. While troubleshooting at the Edge configuration level, the network administrator notices Cloud VPN is not enabled and is grayed out, preventing them from enabling that feature.
- A. Within the Test & Troubleshooting section under Remote Diagnostics.
- B. Where is the next location to check for and enable the necessary feature?
- C. Within the Configuration section under Profiles. Within the Monitor section under Network Services.
- D. Within the Configuration section under Customer VPN enablement.
Answer: D
NEW QUESTION 17
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed thatduring certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
Users at the Dallas Branch are complaining that downloads/uploads from Office365 are slow. Working in Teams has been providing slow responses. The Internet circuit is 100Mbps while the MPLS Circuit is
45Mbps. Upon troubleshooting, the network administrator has noticed the traffic is Backhauling through the Seattle hub for all internet traffic.
How should the network administrator resolve the issue?
- A. Leave the system as is, the gateways will resolve the issues after doing 15 minutes of link qualification.
- B. Prevent the hub from advertising a default route.
- C. Advertise public routes to Office365 and Teams through the New York Hub.
- D. Leave the system as is, the hubs will auto-rebalance tunnels after doing 15 minutes of link qualification.
Answer: C
NEW QUESTION 18
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
A network administrator is receiving complaints that a real-time voice application is not performing well, with choppy audio, and dead audio especially during peak traffic times.
What two actions can the administrator take to diagnose and fix the issue? (Choose two.)
- A. Check the status of the links using the QoE and Transport tabs for any degraded underlay issues or congestion issues.
- B. Configure a QoS policy to load balance the realtime traffic across all links.
- C. Configure a QoS policy to rate limit all traffic during peak times.
- D. Ensure that the realtime application is matching the correct application type using the diagnostics page.
Answer: A,C
NEW QUESTION 19
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that callquality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Users at multiple branches complain that a highly performant SQL Database cluster residing at the New York Data Center is not responding to database queries or inserts as expected. It is affecting the order management site. A network administrator investigates and finds that traffic from the branches are going through Seattle to reach the SQL Cluster in New York. The design for this SD-WAN network does not call for routing security.
The SQL Cluster is reachable through either Data Center, but for performance reasons, must flow through the New York DC. The network administrator has verified that the routes are not present in the OFC and the BGP neighborship is down in Network Services.
Refer to the Exhibit(s).
Exhibit.
What should the administrator verify?
- A. The BGP Authentication matches on both sides.
- B. The BGP configuration has a filter in place to deny the prefix in Seattle.
- C. Backhauling through the Seattle DC is disabled.
- D. The BGP configuration has a filter in place to deny the prefix in New York.
Answer: C
NEW QUESTION 20
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
A network administrator is trying to create multiple overlays on a single physical interface on an Edge. The administrator is able to bring up only a single overlay so far, but is having trouble with bringing up additional overlays.
What could be the possible reason?
- A. The licensing does not support multiple overlays on a single physical interface.
- B. Multiple overlays cannot be created on a single physical interface. Multiple physical interfaces are needed.
- C. The administrator does not have the right permission to create multiple overlays. The administrator needs to have an Operator-level privilege for this task.
- D. On the WAN overlay configuration, verify the IP address, next-hop, and the VLAN ID configuration.
Answer: A
NEW QUESTION 21
Scenario 3:
After resolving numerous connectivity Issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
The network administrator has been made aware that Chicago is receiving traffic from non-SD-WAN sites, bottlenecking Chicago's interfaces. The network administrator's VMware SE has mentioned using the uplink feature to help resolve this.
What are two ways the uplink feature should be used in this scenario? (Choose two.)
- A. Set the uplink community to forward traffic to a group of neighbors.
- B. Direct all traffic to that neighbor designated as an uplink,
- C. Prevent the site in question from becoming a transit site.
- D. Stop mutual redistribution of routes from underlay and overlay.
Answer: B,C
NEW QUESTION 22
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
Where can the network administrator check to see what routes are present on the London-site Edge?
- A. Log into the VCO > Configuration > Overlay Flow Control
- B. Log into the VCO > Test & Troubleshoot > Remote Diagnostics > Run "List Paths"
- C. Log into the VCO > Test & Troubleshoot > Remote Diagnostics > Run "Route Table Dump"
- D. Log into the VCO > Monitoring > Overlay Flow Control
Answer: C
NEW QUESTION 23
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing; internal and external applications.
Exhibit.
A network administrator is configuring several branches to prefer a single prefix, 10.20.11.0/24, from the Seattle hub over the New York hub for various application performance reasons.
What are two effective ways the administrator can accomplish this? (Choose two.)
- A. In the hub preferred order in the profile, set the Seattle hub to be preferred over New York.
- B. Modify the AS Path in New York to be longer for 10.20.11.0/24.
- C. Modify the AS Path in New York to be shorter for 10.20.11.0/24.
- D. In the OFC 10.20.11.0/24, modify the preferred exit point to be Seattle and pin the route.
Answer: A,D
NEW QUESTION 24
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected lo. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
Users are complaining that web pages to certain web sites are very slow to load and at times unresponsive. The network administrator has verified that the traffic is going correctly out the underlay.
What should the administrator check next?
- A. Verify the Business Policy flows are matching.
- B. Verify if routes to Gateways are present in the Overlay Flow Control (OFC).
- C. Verify if Path-MTU Discovery is disabled.
- D. Verify if there is latency, loss, or jitter on the underlay.
Answer: C
NEW QUESTION 25
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
A network administrator decides to deploy a local Checkpoint VNF appliance on the Edge in London to cut back on unnecessary traffic towards the NY Hub location. While attempting to deploy the VNF, the process keeps failing.
Where can the administrator check to see more detail?
- A. VCO > Monitor > Logging
- B. VCO > Test & Troubleshoot > Remote Diagnostics > Events
- C. VCO > Test & Troubleshoot > Remote Actions > Alerts
- D. VCO > Monitor > Events
Answer: A
NEW QUESTION 26
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
Users at a remote office are complaining about poor performance with certain applications. The network administrator has already configured Business Policies based on these requirements.
What is the sequence of parameters that the administrator can check to troubleshoot this problem? (Choose two.)
- A. Check underlay network (bandwidth, latency, jitter, packet loss).
- B. Change the bandwidth measurement under WAN Overlay Advanced Settings.
- C. Review Business Policies configuration and match them against the business requirements.
- D. Under Monitor, check Routing tab.
Answer: A,D
NEW QUESTION 27
Scenario 2:
After resolving numerous connectivity Issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
A network administrator has configured a Business Policy to send a specific application directly out an underlay interface. Users have complained of slow responses for that application. While troubleshooting, the network administrator finds the traffic is actually taking an overlay path to another SD-WAN Edge.
What is causing this behavior?
- A. uI has been configured forcing traffic into the underlay towards the hub.
- B. The other Edge location is advertising a secure route for the application's subnet.
- C. Configuring Business Policy Direct settings have no affect on traffic flows.
- D. Internet Backha.
- E. The underlay path is not available forcing traffic into the overlay.
Answer: A
NEW QUESTION 28
......
5V0-41.20 Braindumps PDF, VMware 5V0-41.20 Exam Cram: https://www.exam4labs.com/5V0-41.20-practice-torrent.html