[2021] 300-425 PDF Questions - Perfect Prospect To Go With Exam4Labs Practice Exam
Cisco 300-425 Pdf Questions - Outstanding Practice To your Exam
NEW QUESTION 29
An engineer must configure the virtual IP address on multiple controllers in a mobility group. Which rule must the engineer follows to ensure proper roaming?
- A. Use a unique IP address for each WLC.
- B. Use the same IP address for each WLC.
- C. Ensure that the DNS entry is tied to the virtual IP address of the WLC.
- D. Ensure that the DNS Host Name field is defined.
Answer: B
Explanation:
NEW QUESTION 30
Clustering Cisco WLCs into a single RF group enables the RRM algorithms to scale beyond the capabilities of a single Cisco WLC. How many WLC and APs in an RF group can the controller software scale up to in WLC release 8.9 depending on the platform?
- A. up to 20 WLCs and 3000 APs
- B. up to 20 WLCs and 1000 APs
- C. up to 20 WLCs and 6000 APs
- D. up to 20 WLCs and 4000 APs
Answer: C
NEW QUESTION 31
A customer has determined that aesthetics is a primary concern for their upcoming guest deployment. Which design consideration can be leveraged to address this concern?
- A. Use enclosures to hide the wireless infrastructure in the surrounding environment.
- B. Use AIR-AP-BRACKET-1 to allow for greater mounting locations
- C. Paint the access point to cover the LED from being noticeable.
- D. Deploy environmentally friendly cabling components to blend into the environment.
Answer: D
NEW QUESTION 32
A wireless engineer is designing a wireless network for a warehouse using access points with internal antennas. Which two elements have a negative effect on the wireless users? (Choose two.)
- A. wireless channels
- B. access point height
- C. absorption
- D. client authorization
- E. client authentication
Answer: B,C
Explanation:
https://www.cisco.com/c/en/us/products/collateral/wireless/aironet-1250-series/design_guide_c07-693245.html#_Toc309331086
NEW QUESTION 33
An engineer is designing a wireless network that will support many different types of wireless clients. When conducting the survey, which client must be used to ensure a consistent experience for all of the wireless clients?
- A. the client that has the highest RF properties
- B. the client with the worst RF characteristics
- C. the client that is used most by the company
- D. the client that is used least by the company
Answer: B
Explanation:
Explanation
https://documentation.meraki.com/MR/WiFi_Basics_and_Best_Practices/Conducting_Site_Surveys_with_MR_A
NEW QUESTION 34
A customer has determined that aesthetics is a primary concern for their upcoming guest deployment. Which design consideration can be leveraged to address this concern?
- A. Use enclosures to hide the wireless infrastructure in the surrounding environment.
- B. Use AIR-AP-BRACKET-1 to allow for greater mounting locations
- C. Paint the access point to cover the LED from being noticeable.
- D. Deploy environmentally friendly cabling components to blend into the environment.
Answer: D
Explanation:
NEW QUESTION 35
Multiple WLCs are implemented in a high-availability configuration in a mobility group. APs are deployed with only a primary controller assigned. By default, which mobility group member controller do the orphaned APs join in the event of a failed controller?
- A. controller with the least number of associated APs
- B. controller with the lowest percent of associated APs per license capacity
- C. controller with the least CPU utilization over the last reporting period
- D. controller with the most available AP free license capacity
Answer: A
Explanation:
Section: Mobility
NEW QUESTION 36
When conducting a site survey for real-time traffic over wireless, which two design capabilities of smartphones and tablets must be considered? (Choose two.)
- A. fewer antennas than laptops
- B. lower data rates than laptops
- C. no support for 802.11r
- D. higher data rates than laptops
- E. no support for 802.11ac
Answer: A,B
Explanation:
NEW QUESTION 37
An engineer is performing a predictive wireless design for a medical treatment environment, which requires data and voice services. What is the minimum requirement for the design?
- A. overlapping -72 dBm coverage from two access points
- B. overlapping -67 dBm coverage from two access points
- C. continuous -67 dBm coverage from one access point
- D. continuous -72 dBm coverage from one access point
Answer: C
NEW QUESTION 38
An engineer is designing a wireless network that will support many different types of wireless clients. When conducting the survey, which client must be used to ensure a consistent experience for all of the wireless clients?
- A. the client that has the highest RF properties
- B. the client with the worst RF characteristics
- C. the client that is used most by the company
- D. the client that is used least by the company
Answer: B
Explanation:
https://documentation.meraki.com/MR/WiFi_Basics_and_Best_Practices/Conducting_Site_Surveys_with_MR_Access_Points
NEW QUESTION 39
A network engineer is working on a design for a wireless network that must support data, voice, and location services. To support these services, which access point placement must the engineer use?
- A. perimeter only
- B. perimeter and corner
- C. corner only
- D. indoor and outdoor
Answer: B
Explanation:
NEW QUESTION 40
Drag and drop the characteristics from the left onto the correct functionalities on the right.
Answer:
Explanation:
NEW QUESTION 41
A customer has two Cisco 550B WLCs that manage all the access points in their network and provide N+1 redundancy and load balancing. The primary Cisco WLC has 60 licenses and the secondary Cisco WLC has
40. The customer wants to convert the N+1 model to an HA model and provide SSO. Configuration must be performed during a maintenance window. After performing all the configurations on both controllers, the config redundancy unit secondary command is issued on the secondary Cisco WLC and it fails. Which parameter needs to be in place to complete the configuration?
- A. The secondary Cisco WLC needs a minimum of 50 base licenses
- B. The primary Cisco WLC is already set as the secondary unit.
- C. A cable in the RP port
- D. SSO needs to be enabled
Answer: A
Explanation:
NEW QUESTION 42
An engineer must create data link redundancy for the company's Cisco Wireless LAN controller. The engineer has decided to configure LAG-based redundancy instead of port-based redundancy. Which three features of LAG-based redundancy influenced this decision? (Choose three.)
- A. Packets are always sent out on the same port they are received on.
- B. All interface traffic passes as long as one port is up.
- C. Full bandwidth of all links is available.
- D. The same port has multiple untagged dynamic interfaces.
- E. Interface connection to two separate nonstacked switches is available.
- F. Ports are grouped into multiple LAGs.
Answer: A,B,F
Explanation:
Explanation
https://community.cisco.com/t5/wireless-mobility-documents/lag-link-aggregation/ta-p/3128669
NEW QUESTION 43
A rapidly expanding company has tasked their network engineer with wirelessly connecting a new cubicle area with Cisco workgroup bridges until the wired network is complete. Each of 42 new users has a computer and VoIP phone. How many APs for workgroup bridging must be ordered to keep cost at a minimum while connecting all devices?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
Explanation:
Explanation
So, each AP will have 25 clients. Minimum 4 APs are sufficient.
NEW QUESTION 44
......
Online Questions - Outstanding Practice To your 300-425 Exam: https://www.exam4labs.com/300-425-practice-torrent.html
Practice To 300-425 - Exam4Labs Remarkable Practice On your Designing Cisco Enterprise Wireless Networks Exam: https://drive.google.com/open?id=1f89xvf4R2n5Id_zj5EmtxjvTlPDr-FA-